On Wed, Jul 13, 2016 at 10:06:47AM +0800, Peter Chen wrote: > Add optional properties for power sequence. > > Signed-off-by: Peter Chen <peter.chen@xxxxxxx> > --- > Documentation/devicetree/bindings/usb/usb-device.txt | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt > index 1c35e7b..0ccaadf 100644 > --- a/Documentation/devicetree/bindings/usb/usb-device.txt > +++ b/Documentation/devicetree/bindings/usb/usb-device.txt > @@ -13,6 +13,10 @@ Required properties: > - reg: the port number which this device is connecting to, the range > is 1-31. > > +Optional properties: > +power sequence properties, see > +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail > + > Example: > > &usb1 { > @@ -24,5 +28,10 @@ Example: > hub: genesys@1 { > compatible = "usb5e3,608"; > reg = <1>; > + > + power-sequence; > + clocks = <&clks IMX6SX_CLK_CKO>; > + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */ > + reset-duration-us = <10>; These belong in the binding doc for the hub. > }; > } > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html