* Tero Kristo <t-kristo@xxxxxx> [131126 00:09]: > Hi, > > Changes compared to v9: > - rebased on top of 3.13-rc1 > - modified the low level clk register API to provide SoC specific clk_readl > and clk_writel support which can be registered during boot, TI SoC variant > uses regmap on low level > - dropped regmap parameter from clock init calls, instead a helper is used > for getting regmap index along with the register offset from DT > - dropped regmap parameter from clock structs, instead platform specific > clk_readl / clk_writel are used to parse reg parameter according to > platform, for TI SoC:s, this is encoded as: > struct clk_omap_reg { > u16 offset; /* register offset */ > u16 index; /* regmap index */ > } > - Nishanth's comments to v9 mostly addressed, except for the CLK_OF_DECLARE > tweak which I would actually want some feedback upon, basically the problem > is I need to return status from the clk init functions so I can see if > -EAGAIN is passed, in which case init will be retried later, maybe some of > this can be made generic, like converting all the CLK_OF_DECLARE type > functions to return status > > Testing done: > - omap3-beagle : boot + suspend/resume > - omap3-beagle-xm : boot (thanks to Nishanth) > - omap4-panda-es : boot + suspend/resume > - omap5-uevm : boot > - dra7-evm : boot > - am335x-bone : boot > > Separate branches available at https://github.com/t-kristo/linux-pm.git > > - full: 3.13-rc1-dt-clks-v10 (should be merged last, contains everything) FYI, I noticed you still have few hack pathces in this branch that you should drop before it's pullable. You can drop "HACK: force enable uart3 rx iochain wakeup" and replace it with "ARM: dts: Fix omap serial wake-up when booted with device tree" I posted few days ago. You may also want to use the latest attempt of patch "of/platform: Fix no irq domain found errors when populating interrupts" to avoid some new warnings. That way you can test off-idle on omap3 with DT, but it's best to keep those out of your branch. Then the "HACK: Makefile: Build a uImage with dtb already appended" you can just replace with a shell script to leave that one out :) > - clk driver only: 3.13-rc1-dt-clks-v10-for-mike > - DT data only: 3.13-rc1-dt-clks-v10-for-benoit I pulled these on top of my patches to make mach-omap2 boot in DT only mode, and there's just a trivial merge conflict with the DT data which is no problem. And looks like off-idle keeps working for me on omap3 :) So for the patches that don't have it yet, please feel free to add: Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html