On Thursday, July 14, 2016 4:29:43 PM CEST Philipp Zabel wrote: > + > + - micrel,fiber-mode: If present the PHY is configured to operate in fiber mode > + > + Some PHYs, such as the KSZ8041FTL variant, support fiber mode, enabled > + by the FXEN boot strapping pin. It can't be determined from the PHY > + registers whether the PHY is in fiber mode, so this boolean device tree > + property can be used to describe it. > + > + In fiber mode, auto-negotiation is disabled and the PHY can only work in > + 100base-fx (full and half duplex) modes. > Could the generic "phy-mode" property used for this, to avoid the need for definingn a custom property? Arnd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
