Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
which specifies whether disable delay PHY power change
from P0 to P1/P2/P3 when link state changing from U0
to U1/U2/U3 respectively.
Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
---
Changes in v7:
- None
Changes in v6:
- use '-' instead of '_' in dts (Rob Herring)
Changes in v5:
- None
Changes in v4:
- rebase on top of balbi testing/next, remove pdata (balbi)
Changes in v3:
- None
Changes in v2:
- None
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 3 +++
3 files changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 00cc541..7832e19 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -42,6 +42,8 @@ Optional properties:
- snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists
in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
a free-running PHY clock.
+ - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power
+ from P0 to P1/P2/P3 without delay.
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 40c54db..bff5ae4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -450,6 +450,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u3_susphy_quirk)
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
+ if (dwc->dis_del_phy_power_chg_quirk)
+ reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -954,6 +957,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,dis_rxdet_inp3_quirk");
dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
"snps,dis-u2-freeclk-exists-quirk");
+ dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
+ "snps,dis-del-phy-power-chg-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 99a72c7..753d977a 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -812,6 +812,8 @@ struct dwc3_scratchpad_array {
* @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
* in GUSB2PHYCFG, specify that USB2 PHY doesn't
* provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ * change quirk.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
@@ -957,6 +959,7 @@ struct dwc3 {
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
