Re: [PATCH] Fix spelling errors in Documentation/devicetree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello!

Attached https://github.com/torvalds/linux/compare/master...ottok:fix-spelling-devicetree.patch
as requested.

2016-07-13 16:30 GMT+03:00 Rob Herring <robh@xxxxxxxxxx>:
> On Tue, Jul 5, 2016 at 4:21 PM, Otto Kekäläinen <otto@xxxxxxxxx> wrote:
>> 2016-07-05 23:47 GMT+03:00 Rob Herring <robh@xxxxxxxxxx>:
>>> On Tue, Jul 05, 2016 at 11:48:26AM +0300, Otto Kekäläinen wrote:
>>>> Signed-off-by: Otto Kekäläinen <otto@xxxxxxxxx>
>>>> ---
>>>>
>>>> I sent this originally to trivial@, but they adviced to submit this directly to you.
>>>> Please apply. Thank you!
>>>
>>> I would, but...
>>>
>>>>
>>>>  Documentation/device-mapper/dm-crypt.txt           |    2 +-
>>>>  Documentation/device-mapper/verity.txt             |    2 +-
>>>
>>> These 2 are not part of DT. Otherwise, looks fine.
>>
>> The corrected, slimmed down patch available now. Instead of
>> resubmitting, I provide the url:
>>
>> curl -O https://github.com/torvalds/linux/compare/master...ottok:fix-spelling-devicetree.patch
>
> Please just resend.
>
> Rob



-- 
Check out our blog at http://seravo.fi/blog
and follow @ottokekalainen
From 37e46febd35e918f754c8a49308983e19119a0e6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Otto=20Kek=C3=A4l=C3=A4inen?= <otto@xxxxxxxxx>
Date: Tue, 5 Jul 2016 23:17:57 +0300
Subject: [PATCH] Fix spelling errors in Documentation/devicetree
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Otto Kekäläinen <otto@xxxxxxxxx>
---
 Documentation/devicetree/bindings/arm/l2c2x0.txt                      | 4 ++--
 Documentation/devicetree/bindings/net/dsa/dsa.txt                     | 2 +-
 Documentation/devicetree/bindings/powerpc/fsl/fman.txt                | 4 ++--
 Documentation/devicetree/bindings/regmap/regmap.txt                   | 2 +-
 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt          | 4 ++--
 Documentation/devicetree/bindings/sound/simple-card.txt               | 2 +-
 Documentation/devicetree/bindings/spi/ti_qspi.txt                     | 2 +-
 .../devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt         | 2 +-
 8 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt
index c453ab5..917199f 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.txt
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt
@@ -86,10 +86,10 @@ Optional properties:
   firmware)
 - arm,dynamic-clock-gating : L2 dynamic clock gating. Value: <0> (forcibly
   disable), <1> (forcibly enable), property absent (OS specific behavior,
-  preferrably retain firmware settings)
+  preferably retain firmware settings)
 - arm,standby-mode: L2 standby mode enable. Value <0> (forcibly disable),
   <1> (forcibly enable), property absent (OS specific behavior,
-  preferrably retain firmware settings)
+  preferably retain firmware settings)
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index 9f4807f..eb13eaf 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -43,7 +43,7 @@ Each port children node must have the following mandatory properties:
 Note that a port labelled "dsa" will imply checking for the uplink phandle
 described below.
 
-Optionnal property:
+Optional property:
 - link			: Should be a list of phandles to another switch's DSA port.
 			  This property is only used when switches are being
 			  chained/cascaded together. This port is used as outgoing port
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
index 55c2c03..df873d1 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
@@ -35,7 +35,7 @@ PROPERTIES
 		Definition: Specifies the index of the FMan unit.
 
 		The cell-index value may be used by the SoC, to identify the
-		FMan unit in the SoC memory map. In the table bellow,
+		FMan unit in the SoC memory map. In the table below,
 		there's a description of the cell-index use in each SoC:
 
 		- P1023:
@@ -247,7 +247,7 @@ PROPERTIES
 
 		The cell-index value may be used by the FMan or the SoC, to
 		identify the MAC unit in the FMan (or SoC) memory map.
-		In the tables bellow there's a description of the cell-index
+		In the tables below there's a description of the cell-index
 		use, there are two tables, one describes the use of cell-index
 		by the FMan, the second describes the use by the SoC:
 
diff --git a/Documentation/devicetree/bindings/regmap/regmap.txt b/Documentation/devicetree/bindings/regmap/regmap.txt
index 0127be3..873096b 100644
--- a/Documentation/devicetree/bindings/regmap/regmap.txt
+++ b/Documentation/devicetree/bindings/regmap/regmap.txt
@@ -14,7 +14,7 @@ architectures that typically run big-endian operating systems
 be marked that way in the devicetree.
 
 On SoCs that can be operated in both big-endian and little-endian
-modes, with a single hardware switch controlling both the endianess
+modes, with a single hardware switch controlling both the endianness
 of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
 chips), "native-endian" is used to allow using the same device tree
 blob in both cases.
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
index 182777f..d5f73b8 100644
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -28,10 +28,10 @@ Optional properties:
 - dma-names: Should contain "tx" for transmit and "rx" for receive channels
 - qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
            used with TX DMA channel. Required when using DMA for transmission
-           with UARTDM v1.3 and bellow.
+           with UARTDM v1.3 and below.
 - qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
            used with RX DMA channel. Required when using DMA for reception
-           with UARTDM v1.3 and bellow.
+           with UARTDM v1.3 and below.
 
 Note: Aliases may be defined to ensure the correct ordering of the UARTs.
 The alias serialN will result in the UART being assigned port N.  If any
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index cf3979e..59d8628 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -30,7 +30,7 @@ Optional subnodes:
 					  sub-nodes. This container may be
 					  omitted when the card has only one
 					  DAI link. See the examples and the
-					  section bellow.
+					  section below.
 
 Dai-link subnode properties and subnodes:
 
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index 50b14f6..e65fde4 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -20,7 +20,7 @@ Optional properties:
 		      chipselect register and offset of that register.
 
 NOTE: TI QSPI controller requires different pinmux and IODelay
-paramaters for Mode-0 and Mode-3 operations, which needs to be set up by
+parameters for Mode-0 and Mode-3 operations, which needs to be set up by
 the bootloader (U-Boot). Default configuration only supports Mode-0
 operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
 specified in the slave nodes of TI QSPI controller without appropriate
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
index 27cfc7d..8d6e4fd 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -9,7 +9,7 @@ Required properties:
 		one)
 - clocks: phandle to the source clock (usually the AHB clock)
 
-Optionnal properties:
+Optional properties:
 - resets: phandle to a reset controller asserting the timer
 
 Example:

[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux