Re: [PATCH v3] Input: synaptics-rmi4: Support regulator supplies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Jun 24, 2016 at 5:40 PM, Andrew Duggan <aduggan@xxxxxxxxxxxxx> wrote:
> On 06/10/2016 10:25 PM, Bjorn Andersson wrote:
>>
>> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
>>
>> Support the two supplies - vdd and vio - to make it possible to control
>> power to the Synaptics chip.
>>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
>> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>
>
> Reviewed-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>

Dmitry, do you have any comments or would you mind pick this up?

Regards,
Bjorn

>
>
>> ---
>>   .../devicetree/bindings/input/rmi4/rmi_i2c.txt     |  9 +++++
>>   drivers/input/rmi4/rmi_i2c.c                       | 41
>> ++++++++++++++++++++++
>>   2 files changed, 50 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
>> b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
>> index 95fa715c6046..ec908b91fd90 100644
>> --- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
>> +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
>> @@ -22,6 +22,15 @@ See
>> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>>   - syna,reset-delay-ms: The number of milliseconds to wait after
>> resetting the
>>                         device.
>>   +- syna,startup-delay-ms: The number of milliseconds to wait after
>> powering on
>> +                        the device.
>> +
>> +- vdd-supply: VDD power supply.
>> +See ../regulator/regulator.txt
>> +
>> +- vio-supply: VIO power supply
>> +See ../regulator/regulator.txt
>> +
>>   Function Parameters:
>>   Parameters specific to RMI functions are contained in child nodes of the
>> rmi device
>>    node. Documentation for the parameters of each function can be found
>> in:
>> diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
>> index a96a326b53bd..71dc6cdde8ac 100644
>> --- a/drivers/input/rmi4/rmi_i2c.c
>> +++ b/drivers/input/rmi4/rmi_i2c.c
>> @@ -11,6 +11,8 @@
>>   #include <linux/rmi.h>
>>   #include <linux/irq.h>
>>   #include <linux/of.h>
>> +#include <linux/delay.h>
>> +#include <linux/regulator/consumer.h>
>>   #include "rmi_driver.h"
>>     #define BUFFER_SIZE_INCREMENT 32
>> @@ -37,6 +39,9 @@ struct rmi_i2c_xport {
>>         u8 *tx_buf;
>>         size_t tx_buf_size;
>> +
>> +       struct regulator_bulk_data supplies[2];
>> +       u32 startup_delay;
>>   };
>>     #define RMI_PAGE_SELECT_REGISTER 0xff
>> @@ -246,6 +251,24 @@ static int rmi_i2c_probe(struct i2c_client *client,
>>                 return -ENODEV;
>>         }
>>   +     rmi_i2c->supplies[0].supply = "vdd";
>> +       rmi_i2c->supplies[1].supply = "vio";
>> +       retval = devm_regulator_bulk_get(&client->dev,
>> +                                        ARRAY_SIZE(rmi_i2c->supplies),
>> +                                        rmi_i2c->supplies);
>> +       if (retval < 0)
>> +               return retval;
>> +
>> +       retval = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
>> +                                      rmi_i2c->supplies);
>> +       if (retval < 0)
>> +               return retval;
>> +
>> +       of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms",
>> +                            &rmi_i2c->startup_delay);
>> +
>> +       msleep(rmi_i2c->startup_delay);
>> +
>>         rmi_i2c->client = client;
>>         mutex_init(&rmi_i2c->page_mutex);
>>   @@ -286,6 +309,7 @@ static int rmi_i2c_remove(struct i2c_client *client)
>>         struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
>>         rmi_unregister_transport_device(&rmi_i2c->xport);
>> +       regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
>> rmi_i2c->supplies);
>>         return 0;
>>   }
>> @@ -308,6 +332,9 @@ static int rmi_i2c_suspend(struct device *dev)
>>                         dev_warn(dev, "Failed to enable irq for wake:
>> %d\n",
>>                                 ret);
>>         }
>> +
>> +       regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
>> rmi_i2c->supplies);
>> +
>>         return ret;
>>   }
>>   @@ -317,6 +344,12 @@ static int rmi_i2c_resume(struct device *dev)
>>         struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
>>         int ret;
>>   +     ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
>> rmi_i2c->supplies);
>> +       if (ret)
>> +               return ret;
>> +
>> +       msleep(rmi_i2c->startup_delay);
>> +
>>         enable_irq(rmi_i2c->irq);
>>         if (device_may_wakeup(&client->dev)) {
>>                 ret = disable_irq_wake(rmi_i2c->irq);
>> @@ -346,6 +379,8 @@ static int rmi_i2c_runtime_suspend(struct device *dev)
>>         disable_irq(rmi_i2c->irq);
>>   +     regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
>> rmi_i2c->supplies);
>> +
>>         return 0;
>>   }
>>   @@ -355,6 +390,12 @@ static int rmi_i2c_runtime_resume(struct device
>> *dev)
>>         struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
>>         int ret;
>>   +     ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
>> rmi_i2c->supplies);
>> +       if (ret)
>> +               return ret;
>> +
>> +       msleep(rmi_i2c->startup_delay);
>> +
>>         enable_irq(rmi_i2c->irq);
>>         ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux