From: Douglas Anderson <dianders@xxxxxxxxxxxx> The previous tables for mpll_cfg and curr_ctrl were created using the 20-pages of example settings provided by the PHY vendor. Those example settings weren't particularly dense, so there were places where we were guessing what the settings would be for 10-bit and 12-bit (not that we use those anyway). It was also always a lot of extra work every time we wanted to add a new clock rate since we had to cross-reference several tables. In <http://crosreview.com/285855> I've gone through the work to figure out how to generate this table automatically. Let's now use the automatically generated table and then we'll never need to look at it again. We only support 8-bit mode right now and only support a small number of clock rates and and I've verified that the only 8-bit rate that was affected was 148.5. That mode appears to have been wrong in the old table. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx> Reviewed-by: Stéphane Marchesin <marcheu@xxxxxxxxxxxx> --- drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 130 +++++++++++++++------------- 1 file changed, 69 insertions(+), 61 deletions(-) diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c index cdb63ac..8cb9ed2 100644 --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c @@ -34,80 +34,88 @@ struct rockchip_hdmi { static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = { { - 27000000, { - { 0x00b3, 0x0000}, - { 0x2153, 0x0000}, - { 0x40f3, 0x0000} + 30666000, { + { 0x00b3, 0x0000 }, + { 0x2153, 0x0000 }, + { 0x40f3, 0x0000 }, }, - }, { - 36000000, { - { 0x00b3, 0x0000}, - { 0x2153, 0x0000}, - { 0x40f3, 0x0000} + }, { + 36800000, { + { 0x00b3, 0x0000 }, + { 0x2153, 0x0000 }, + { 0x40a2, 0x0001 }, }, - }, { - 40000000, { - { 0x00b3, 0x0000}, - { 0x2153, 0x0000}, - { 0x40f3, 0x0000} + }, { + 46000000, { + { 0x00b3, 0x0000 }, + { 0x2142, 0x0001 }, + { 0x40a2, 0x0001 }, }, - }, { - 54000000, { - { 0x0072, 0x0001}, - { 0x2142, 0x0001}, - { 0x40a2, 0x0001}, + }, { + 61333000, { + { 0x0072, 0x0001 }, + { 0x2142, 0x0001 }, + { 0x40a2, 0x0001 }, }, - }, { - 65000000, { - { 0x0072, 0x0001}, - { 0x2142, 0x0001}, - { 0x40a2, 0x0001}, + }, { + 73600000, { + { 0x0072, 0x0001 }, + { 0x2142, 0x0001 }, + { 0x4061, 0x0002 }, }, - }, { - 66000000, { - { 0x013e, 0x0003}, - { 0x217e, 0x0002}, - { 0x4061, 0x0002} + }, { + 92000000, { + { 0x0072, 0x0001 }, + { 0x2145, 0x0002 }, + { 0x4061, 0x0002 }, + }, + }, { + 122666000, { + { 0x0051, 0x0002 }, + { 0x2145, 0x0002 }, + { 0x4061, 0x0002 }, }, - }, { - 74250000, { - { 0x0072, 0x0001}, - { 0x2145, 0x0002}, - { 0x4061, 0x0002} + }, { + 147200000, { + { 0x0051, 0x0002 }, + { 0x2145, 0x0002 }, + { 0x4064, 0x0003 }, }, - }, { - 83500000, { - { 0x0072, 0x0001}, + }, { + 184000000, { + { 0x0051, 0x0002 }, + { 0x214c, 0x0003 }, + { 0x4064, 0x0003 }, }, - }, { - 108000000, { - { 0x0051, 0x0002}, - { 0x2145, 0x0002}, - { 0x4061, 0x0002} + }, { + 226666000, { + { 0x0040, 0x0003 }, + { 0x214c, 0x0003 }, + { 0x4064, 0x0003 }, }, - }, { - 106500000, { - { 0x0051, 0x0002}, - { 0x2145, 0x0002}, - { 0x4061, 0x0002} + }, { + 272000000, { + { 0x0040, 0x0003 }, + { 0x214c, 0x0003 }, + { 0x5a64, 0x0003 }, }, - }, { - 146250000, { - { 0x0051, 0x0002}, - { 0x2145, 0x0002}, - { 0x4061, 0x0002} + }, { + 340000000, { + { 0x0040, 0x0003 }, + { 0x3b4c, 0x0003 }, + { 0x5a64, 0x0003 }, }, - }, { - 148500000, { - { 0x0051, 0x0003}, - { 0x214c, 0x0003}, - { 0x4064, 0x0003} + }, { + 600000000, { + { 0x1a40, 0x0003 }, + { 0x3b4c, 0x0003 }, + { 0x5a64, 0x0003 }, }, - }, { + }, { ~0UL, { - { 0x00a0, 0x000a }, - { 0x2001, 0x000f }, - { 0x4002, 0x000f }, + { 0x0000, 0x0000 }, + { 0x0000, 0x0000 }, + { 0x0000, 0x0000 }, }, } }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
