On Sat, Jul 9, 2016 at 12:05 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote: > Remove all mention of q8 from sun5i-reference-design-tablet.dtsi. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi > index e78452c..20cc940 100644 > --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi > +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi > @@ -98,7 +98,7 @@ > > &mmc0 { > pinctrl-names = "default"; > - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; > + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; > vmmc-supply = <®_vcc3v0>; > bus-width = <4>; > cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ > @@ -118,7 +118,7 @@ > allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > }; > > - mmc0_cd_pin_q8: mmc0_cd_pin@0 { > + mmc0_cd_pin: mmc0_cd_pin@0 { We could name this mmc0_cd_pin_reference_design and put it in sun5i-a13.dtsi. We already do this for A10/A20. This works equally well though. Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> > allwinner,pins = "PG0"; > allwinner,function = "gpio_in"; > allwinner,drive = <SUN4I_PINCTRL_10_MA>; > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html