Update the gpio name parsing code to try to search for without the
"qcom,hdmi-tx-" prefix. The older downstream bindings that expect
"qcom,hdmi-tx-xyz" or "qcom,hdmi-tx-xyz-gpio" would work as the
property name would work as before.
Update the binding doc. Add an entry for the missing hpd and lpm
gpios.
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/display/msm/hdmi.txt | 6 ++++--
drivers/gpu/drm/msm/hdmi/hdmi.c | 16 ++++++++++++++++
2 files changed, 20 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index b63f614..4da1abd 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -23,8 +23,10 @@ Required properties:
- phy-names: the name of the corresponding PHY device
Optional properties:
-- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+- hpd-gpio: hdmi hpd pin
+- mux-en-gpio: hdmi mux enable pin
+- mux-sel-gpio: hdmi mux select pin
+- mux-lpm-gpio: hdmi mux lpm pin
- power-domains: reference to the power domain(s), if available.
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 51b9ea5..d48305f 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -422,11 +422,27 @@ static const struct {
static int msm_hdmi_get_gpio(struct device_node *of_node, const char *name)
{
int gpio = of_get_named_gpio(of_node, name, 0);
+
+ /*
+ * This is complicated mainly because we want the downstream kernel
+ * DT files working with the upstream kernel. We first try with the
+ * names as listed above in the table. We then append "gpio" to it and
+ * try again. We finally try the DT bindings as they would be in
+ * upstream dtsi files by stripping off the "qcom,hdmi-tx-" prefix.
+ * We'll get rid of this when we don't rely on downstream bindings.
+ */
if (gpio < 0) {
char name2[32];
snprintf(name2, sizeof(name2), "%s-gpio", name);
gpio = of_get_named_gpio(of_node, name2, 0);
if (gpio < 0) {
+ char name3[32];
+
+ if (sscanf(name2, "qcom,hdmi-tx-%s", name3))
+ gpio = of_get_named_gpio(of_node, name3, 0);
+ }
+
+ if (gpio < 0) {
DBG("failed to get gpio: %s (%d)", name, gpio);
gpio = -1;
}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
