at July, 7th, Heiko Stuebner Wrote:
Hi,
Am Mittwoch, 6. Juli 2016, 23:25:23 schrieb ayaka:
The regulator settings are the same in the firefly beta and
firefly. But the firefly reload is different. I remove
the difference part from the common header dtsi, but remained those
common one to keep references.
Signed-off-by: ayaka <ayaka@xxxxxxxxxxx>
applies to all 3 patches: we require real names both in the patch/mail from
as well as the Signed-off-by line, see [0] at number 11. To my untrained eye
the name given doesn't look like a real name, please correct me if I'm
wrong.
[0] https://www.kernel.org/doc/Documentation/SubmittingPatches
---
arch/arm/boot/dts/rk3288-firefly-beta.dts | 30
++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly.dts
| 30 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3288-firefly.dtsi
| 14 +++++++-------
3 files changed, 67 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts
b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 75d77e3..6c08dae2
100644
--- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
@@ -69,3 +69,33 @@
&pwm0 {
status = "okay";
};
+
+&gmac {
+ phy-supply = <&vcc_lan>;
+};
Not 100% sure, but I guess this does not need to be duplicated.
The supply is named vcc_lan in all board revisions only the supplying
regulator seems different, so it should be enough to point the vcc_lan
phandle to the correct regulator in the relevant file, but the gmac
assignment could stay in the main file?
But I can't have two label in two different place.
So I have no choice but to do so. If the dts compiler in kernel support
the overwrite now and unresolved symbols now, I would glad to know that.
+
+&io_domains {
+ audio-supply = <&vcca_33>;
+ flash1-supply = <&vcc_lan>;
+};
same here
+
+®ulators {
+ vcca_18: REG7 {
+ regulator-name = "vcca_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcca_33: REG8 {
+ regulator-name = "vcca_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_lan: REG9 {
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dts
b/arch/arm/boot/dts/rk3288-firefly.dts index c07fe92..1964b6f 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dts
+++ b/arch/arm/boot/dts/rk3288-firefly.dts
@@ -69,3 +69,33 @@
&pwm1 {
status = "okay";
};
+
+&gmac {
+ phy-supply = <&vcc_lan>;
+};
+
+&io_domains {
+ audio-supply = <&vcca_33>;
+ flash1-supply = <&vcc_lan>;
+};
+
+®ulators {
+ vcca_18: REG7 {
+ regulator-name = "vcca_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcca_33: REG8 {
+ regulator-name = "vcca_33";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_lan: REG9 {
+ regulator-name = "vcc_lan";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi
b/arch/arm/boot/dts/rk3288-firefly.dtsi index 1d7f03c..205348f 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -68,11 +68,9 @@
compatible = "rockchip,rk3288-io-voltage-domain";
rockchip,grf = <&grf>;
- audio-supply = <&vcca_33>;
bb-supply = <&vcc_io>;
dvp-supply = <&dovdd_1v8>;
flash0-supply = <&vcc_flash>;
- flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
@@ -225,7 +223,6 @@
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
- phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
@@ -296,7 +293,7 @@
inl2-supply = <&vcc_sys>;
inl3-supply = <&vcc_20>;
- regulators {
+ regulators: regulators {
the phandle name is to generic, as this is part of the act8846 and not
something generic. So please name the phandle act8846_regulators /
act8846_regs or so.
I forget that, I would re-send new patches. I am very sorry to re-send
the same patches three times.
I should not be such hurry.
vcc_ddr: REG1 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <1200000>;
@@ -339,24 +336,27 @@
regulator-always-on;
};
- vcca_18: REG7 {
+ REG7 {
regulator-name = "vcca_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- vcca_33: REG8 {
+
unecessary new empty line
It would be removed
+ REG8 {
regulator-name = "vcca_33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
- vcc_lan: REG9 {
+ REG9 {
regulator-name = "vcc_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
unecessary new empty line
It would be removed
vdd_10: REG10 {
regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
--
2.7.4
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
