From: Roger Quadros <rogerq@xxxxxx>
USB_DPLL must be initialized and locked at boot so that
USB modules can work.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
Tested-by: Nishanth Menon <nm@xxxxxx>
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/clk/ti/clk-54xx.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index c876e6e..0ef9f58 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -19,6 +19,12 @@
#define OMAP5_DPLL_ABE_DEFFREQ 98304000
+/*
+ * OMAP543x TRM, section "3.6.3.9.5 DPLL_USB Preferred Settings"
+ * states it must be at 960MHz
+ */
+#define OMAP5_DPLL_USB_DEFFREQ 960000000
+
static struct ti_dt_clk omap54xx_clks[] = {
DT_CLK(NULL, "pad_clks_src_ck", "pad_clks_src_ck"),
DT_CLK(NULL, "pad_clks_ck", "pad_clks_ck"),
@@ -220,7 +226,7 @@ static struct ti_dt_clk omap54xx_clks[] = {
int __init omap5xxx_dt_clk_init(void)
{
int rc;
- struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck;
+ struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll;
ti_dt_clocks_register(omap54xx_clks);
@@ -235,5 +241,15 @@ int __init omap5xxx_dt_clk_init(void)
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
+ usb_dpll = clk_get_sys(NULL, "dpll_usb_ck");
+ rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ);
+ if (rc)
+ pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
+ usb_dpll = clk_get_sys(NULL, "dpll_usb_m2_ck");
+ rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ/2);
+ if (rc)
+ pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__);
+
return 0;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
