Hi There,
On 05.07.2016 10:33, Icenowy Zheng wrote:
On 01.07.2016 11:29, Icenowy Zheng wrote:
+
+static enum power_supply_property axp22x_battery_properties[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
Here's what Bruno's driver supports:
static enum power_supply_property axp20x_battery_power_properties[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CURRENT_NOW,
POWER_SUPPLY_PROP_CURRENT_MAX,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
/* POWER_SUPPLY_PROP_POWER_NOW, */
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
/* POWER_SUPPLY_PROP_CHARGE_NOW, */
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
};
+
+static int axp20x_battery_probe(struct platform_device *pdev)
+{
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {};
+ struct axp20x_battery *power;
+ static const char * const axp22x_irq_names[] = {
+ "BATT_PLUGIN", "BATT_REMOVAL", "BATT_ENT_ACT_MODE",
+ "BATT_EXIT_ACT_MODE", "CHARG", "CHARG_DONE", NULL };
And here are the interrupts handled:
static const char * const irq_names[] = { "BATT_HOT", "BATT_COLD",
"BATT_PLUGIN", "BATT_REMOVAL", "BATT_ACTIVATE",
"BATT_ACTIVATED", "BATT_CHARGING", "BATT_CHARGED",
"BATT_CHG_CURR_LOW", "BATT_POWER_LOW_WARN",
"BATT_POWER_LOW_CRIT" };
There are a couple of issues with the version of Bruno's driver that I have:
* power management is disabled (in the driver, not in the charger) -
think suspend/resume
* the temperature sensor data is not turned into a temperature value
correctly
* the IRQ handlers need to be cleaned up (remove logging)
* device tree binding documentation is missing
Other than that, it's basically working and I have been using it at
least for some testing.
The device tree bindings support:
* OCV curve support
* battery resistance
* battery capacity
* temp sensor settings
You can find my copy of Bruno's driver here:
https://github.com/mhaas/linux-sunxi/blob/axp209-charger/drivers/power/axp20x_fuel_gauge.c
Thanks,
Michael
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
