CC devicetree On Thu, Jun 30, 2016 at 5:54 AM, <apronin@xxxxxxxxxxxx> wrote: > From: Andrey Pronin <apronin@xxxxxxxxxxxx> > > Some SPI devices may go to sleep after a period of inactivity > on SPI. For such devices, if enough time has passed since the > last SPI transaction, toggle CS and wait for the device to > start before communicating with it. > > Signed-off-by: Andrey Pronin <apronin@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/spi/spi-bus.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt > index 42d5954..1b7ffd4 100644 > --- a/Documentation/devicetree/bindings/spi/spi-bus.txt > +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt > @@ -63,6 +63,13 @@ contain the following properties. > used for MISO. Defaults to 1 if not present. > - spi-rx-delay-us - (optional) Microsecond delay after a read transfer. > - spi-tx-delay-us - (optional) Microsecond delay after a write transfer. > +- cs-wake-after-sleep - (optional) Device may go to sleep after a period > + of SPI inactivity. If this flag is set, toggle CS and > + wait for it to wake before communicating to it. > +- cs-sleep-delay - (optional) Delay after which the device may go to > + sleep if there was no SPI activity (msec). > +- cs-wake-duration - (optional) Time it takes the device to wake up after > + toggling CS if it went to sleep (msec). > > Some SPI controllers and devices support Dual and Quad SPI transfer mode. > It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD). > -- > 2.6.6 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
