On Wednesday, June 29, 2016 10:46:23 AM CEST Timur Tabi wrote: > Arnd Bergmann wrote: > > Usually drivers try 64-bit mask and 32-bit masks, and the 32 bit > > mask is practically guaranteed to succeed. > > Sure, but in theory, my for-loop is correct, right? Wouldn't there be > some value in setting a 36-bit or 40-bit DMA mask if it works? We have > a platform where memory starts at a 40-bit address, so some devices have > a 44-bit address bus. If a 64-bit mask doesn't work, then a 32-bit mask > certainly wont. The question is whether it makes any difference to the driver: what decision does the driver make differently if it has set a 44-bit mask? We don't have ZONE_DMA44 (and it's very unlikely that we will introduce it), so neither the driver nor the network stack can actually act on the fact that a 64-bit mask failed but a 44-bit mask succeeded. > > Platforms will also allow allow the driver to set a mask that > > is larger than what the bus supports, as long as all RAM is > > reachable by the bus. > > And that check (like all others) is made in the dma_set_mask call? Yes. Regarding the system you mentioned: I understand that it has no memory in ZONE_DMA32 and no IOMMU (btw, that also means 32-bit PCI devices are fundamentally broken), and the bus can only address the lower 44 bit of address space. Does this system support more than 15TB of RAM? If not, then there is no problem, and if it does, I think your best way out is not to disable SWIOTLB. That will be a slower compared to a system with an IOMMU or the fictional ZONE_DMA44, but it should work correctly. In either case (less than 15TB without swiotlb, or more than 15TB with swiotlb), the driver should just ask for a 64-bit mask and that will succeed. Arnd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html