On Tue, Jun 28, 2016 at 09:22:50AM +0800, Wenyou Yang wrote: > Due the driver improvements, update the properties, > - Remove "active-semi,check-battery-temperature" property. > - Add the properties, "active-semi,irq_gpio" > and "active-semi,lbo-gpios". > > Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx> > --- > > Changes in v2: None > > Documentation/devicetree/bindings/power/act8945a-charger.txt | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/power/act8945a-charger.txt b/Documentation/devicetree/bindings/power/act8945a-charger.txt > index bea254c..d7cf05b 100644 > --- a/Documentation/devicetree/bindings/power/act8945a-charger.txt > +++ b/Documentation/devicetree/bindings/power/act8945a-charger.txt > @@ -4,10 +4,12 @@ Required properties: > - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt. > - active-semi,chglev-gpios: charge current level phandle with args > as described in ../gpio/gpio.txt. > + - active-semi,irq_gpios: specify the charger interrupt input phanle > + with args as as described in ../gpio/gpio.txt. Use "interrupts" property instead. > + - active-semi,lbo-gpios: specify the low battery voltage detect phandle > + with args as as described in ../gpio/gpio.txt. > > Optional properties: > - - active-semi,check-battery-temperature: boolean to check the battery > - temperature or not. > - active-semi,input-voltage-threshold-microvolt: unit: mV; > Specifies the charger's input over-voltage threshold value; > The value can be: 6600, 7000, 7500, 8000; default: 6600 > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
