On Tue, Nov 05, 2013 at 05:13:21PM +0100, Kamil Debski wrote: > Change the used phy driver to the new Exynos USB phy driver that uses the > generic phy framework. > > Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > --- > drivers/usb/gadget/s3c-hsotg.c | 12 +++++++----- > 1 file changed, 7 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c > index bb31262..dc7f20c 100644 > --- a/drivers/usb/gadget/s3c-hsotg.c > +++ b/drivers/usb/gadget/s3c-hsotg.c > @@ -31,6 +31,7 @@ > #include <linux/regulator/consumer.h> > #include <linux/of.h> > #include <linux/of_platform.h> > +#include <linux/phy/phy.h> > > #include <linux/usb/ch9.h> > #include <linux/usb/gadget.h> > @@ -162,7 +163,7 @@ struct s3c_hsotg_ep { > struct s3c_hsotg { > struct device *dev; > struct usb_gadget_driver *driver; > - struct usb_phy *phy; > + struct phy *phy; > struct s3c_hsotg_plat *plat; > > spinlock_t lock; > @@ -2905,9 +2906,10 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg) > dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev); > > if (hsotg->phy) > - usb_phy_init(hsotg->phy); > + phy_power_on(hsotg->phy); > else if (hsotg->plat->phy_init) > hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); > + Stray whitespace > } > > /** > @@ -2922,7 +2924,7 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg) > struct platform_device *pdev = to_platform_device(hsotg->dev); > > if (hsotg->phy) > - usb_phy_shutdown(hsotg->phy); > + phy_power_off(hsotg->phy); > else if (hsotg->plat->phy_exit) > hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); > } > @@ -3529,7 +3531,7 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg) > static int s3c_hsotg_probe(struct platform_device *pdev) > { > struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev); > - struct usb_phy *phy; > + struct phy *phy; > struct device *dev = &pdev->dev; > struct s3c_hsotg_ep *eps; > struct s3c_hsotg *hsotg; > @@ -3544,7 +3546,7 @@ static int s3c_hsotg_probe(struct platform_device *pdev) > return -ENOMEM; > } > > - phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); > + phy = devm_phy_get(&pdev->dev, "device"); A more descriptive string would be useful here IMHO. Since this is USB 2.0 IP, perhaps "usb2-phy" like musb uses. phy-names = "usb2-phy"; looks far more unique than phy-names = "device"; in the dts. Also, this has impact on the samsung-hsotg.txt binding. It should be updated to reflect the required generic phy properties that will be used when booting from DT: - phys: phy provider specifier - phy-names: shall be "device" [or "usb2-phy" if the above suggestion is adopted] I've rebased my BCM281xx UDC series [1] against this s3c-hsotg generic phy support and it's working fine. I do add phy_init/phy_exit support which is probably better coming in with my series as my phy driver makes use of the init method. Tested-by: Matt Porter <matt.porter@xxxxxxxxxx> -Matt [1] http://www.kernelhub.org/?msg=367354&p=2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html