The USB OTG mode is not supported by Kestone 2 devices, as result, the
USB devices enumeration and detection will not work properly when
kernel is built with CONFIG_USB_DWC3_DUAL_ROLE=y (default for multi
platform build):
- it's required to load gadget drivers manually to make host mode
work and this confuses current Keystone 2 users
- device mode is not working, because port can't detect and switch to
peripheral/host mode dynamically.
Hence, specify usb mode explicitly in DT: usb0 = "host" for all KS2
devices and usb1 = "peripheral" for K2E.
Cc: Sekhar Nori <nsekhar@xxxxxx>
Cc: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
arch/arm/boot/dts/keystone-k2e-evm.dts | 12 ++++++++++--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 ++--
arch/arm/boot/dts/keystone-k2hk-evm.dts | 6 +++++-
arch/arm/boot/dts/keystone-k2l-evm.dts | 6 +++++-
arch/arm/boot/dts/keystone.dtsi | 4 ++--
5 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 4c32ebc..ae1ebe7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -47,18 +47,26 @@
status = "okay";
};
-&usb {
+&keystone_usb0 {
status = "okay";
};
+&usb0 {
+ dr_mode = "host";
+};
+
&usb1_phy {
status = "okay";
};
-&usb1 {
+&keystone_usb1 {
status = "okay";
};
+&usb1 {
+ dr_mode = "peripheral";
+};
+
&i2c0 {
dtt@50 {
compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 96b349f..3540a1d 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -61,7 +61,7 @@
status = "disabled";
};
- usb1: usb@25000000 {
+ keystone_usb1: usb@25000000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
#size-cells = <1>;
@@ -74,7 +74,7 @@
dma-ranges;
status = "disabled";
- dwc3@25010000 {
+ usb1: dwc3@25010000 {
compatible = "synopsys,dwc3";
reg = <0x25010000 0x70000>;
interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index b38b344..2156ff9 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -83,10 +83,14 @@
status = "okay";
};
-&usb {
+&keystone_usb0 {
status = "okay";
};
+&usb0 {
+ dr_mode = "host";
+};
+
&aemif {
cs0 {
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 7f9c2e9..056b42f 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -32,10 +32,14 @@
status = "okay";
};
-&usb {
+&keystone_usb0 {
status = "okay";
};
+&usb0 {
+ dr_mode = "host";
+};
+
&i2c0 {
dtt@50 {
compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index e34b226..96c9943 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -188,7 +188,7 @@
status = "disabled";
};
- usb: usb@2680000 {
+ keystone_usb0: usb@2680000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
#size-cells = <1>;
@@ -201,7 +201,7 @@
dma-ranges;
status = "disabled";
- dwc3@2690000 {
+ usb0: dwc3@2690000 {
compatible = "synopsys,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
