This is a more common format for DT bindings:
dt-bindings: regulator:
On Tue, 28 Jun 2016, Keerthy wrote:
> This updates the device tree according to the preferred way of parsing
Nit: Device Tree
> the nodes using the regulator framework.
>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
> ---
> .../devicetree/bindings/regulator/tps65218.txt | 87 ++++++++++++++++++----
> 1 file changed, 71 insertions(+), 16 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt
> index fccc1d2..5e1888f 100644
> --- a/Documentation/devicetree/bindings/regulator/tps65218.txt
> +++ b/Documentation/devicetree/bindings/regulator/tps65218.txt
> @@ -1,23 +1,78 @@
> TPS65218 family of regulators
>
> Required properties:
> -For tps65218 regulators/LDOs
> -- compatible:
> - - "ti,tps65218-dcdc1" for DCDC1
> - - "ti,tps65218-dcdc2" for DCDC2
> - - "ti,tps65218-dcdc3" for DCDC3
> - - "ti,tps65218-dcdc4" for DCDC4
> - - "ti,tps65218-dcdc5" for DCDC5
> - - "ti,tps65218-dcdc6" for DCDC6
> - - "ti,tps65218-ldo1" for LDO1
> -
> -Optional properties:
> -- Any optional property defined in bindings/regulator/regulator.txt
> +- compatible: "ti,tps65218"
> +- reg: I2C slave address
'\n' here for clarity.
> +- list of regulators provided by this controller, must be named
Sentences start with an uppercase char.
> + after their hardware counterparts: dcdc[1-6] and ldo1
> +- This is the list of child nodes that specify the regulator
> + initialization data for defined regulators. Not all regulators for the given
> + device need to be present. The definition for each of these nodes is defined
> + using the standard binding for regulators found at
> + Documentation/devicetree/bindings/regulator/regulator.txt.
Use relative path names for brevity.
./regulator.txt
> + The valid names for regulators are:
> + tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4,
> + regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3
> + Each regulator is defined using the standard binding for regulators.
>
> Example:
> +tps65218: tps65218@24 {
Is this label used?
> + reg = <0x24>;
> + compatible = "ti,tps65218";
> + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
> + interrupt-controller;
> + #interrupt-cells = <2>;
[...]
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
