Signed-off-by: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
---
Changes since v4:
- Appended -hz to dc-dc-freq
- Added adi,dc-dc-max-microvolt
- Added reg property
Changes since v3:
- replaced '_' with '-'
- Now used actual values instead of register values.
Changes since v2:
- Removed defines, alot easier to read
.../devicetree/bindings/iio/dac/ad5755.txt | 124 +++++++++++++++++++++
1 file changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5755.txt
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
new file mode 100644
index 0000000..f0bbd7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
@@ -0,0 +1,124 @@
+* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+
+Required properties:
+ - compatible: Has to contain one of the following:
+ adi,ad5755
+ adi,ad5755-1
+ adi,ad5757
+ adi,ad5735
+ adi,ad5737
+
+ - reg: spi chip select number for the device
+ - spi-cpha or spi-cpol: is the only modes that is supported
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+See include/dt-bindings/iio/ad5755.h
+ - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
+ external resistor and thereby bypasses
+ the internal compensation resistor.
+ - adi,dc-dc-phase:
+ Valid values for DC DC Phase control is:
+ 0: All dc-to-dc converters clock on the same edge.
+ 1: Channel A and Channel B clock on the same edge,
+ Channel C and Channel D clock on opposite edges.
+ 2: Channel A and Channel C clock on the same edge,
+ Channel B and Channel D clock on opposite edges.
+ 3: Channel A, Channel B, Channel C, and Channel D
+ clock 90 degrees out of phase from each other.
+ - adi,dc-dc-freq-hz:
+ Valid values for DC DC frequency is [Hz]:
+ 250000
+ 410000
+ 650000
+ - adi,dc-dc-max-microvolt:
+ Valid values for the maximum allowed Vboost voltage supplied by
+ the dc-to-dc converter is:
+ 23000000
+ 24500000
+ 27000000
+ 29500000
+
+Optional for every channel:
+ - adi,mode:
+ Valid values for DAC modes is:
+ 0: 0 V to 5 V voltage range.
+ 1: 0 V to 10 V voltage range.
+ 2: Plus minus 5 V voltage range.
+ 3: Plus minus 10 V voltage range.
+ 4: 4 mA to 20 mA current range.
+ 5: 0 mA to 20 mA current range.
+ 6: 0 mA to 24 mA current range.
+ - adi,ext-current-sense-resistor: boolean set if the hardware a external
+ current sense resistor.
+ - adi,enable-voltage-overrange: boolean enable voltage overrange
+ - adi,slew: Array of slewrate settings should contain 3 fields:
+ 1: Should be either 0 or 1 in order to enable or disable slewrate.
+ 2: Slew rate settings:
+ Valid values for the slew rate update frequency:
+ 64000
+ 32000
+ 16000
+ 8000
+ 4000
+ 2000
+ 1000
+ 500
+ 250
+ 125
+ 64
+ 32
+ 16
+ 8
+ 4
+ 0
+ 3: Slew step size:
+ Valid values for the step size LSBs:
+ 1
+ 2
+ 4
+ 16
+ 32
+ 64
+ 128
+ 256
+
+Example:
+dac@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "adi,ad5755";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ adi,dc-dc-phase = <0>;
+ adi,dc-dc-freq-hz = <410000>;
+ adi,dc-dc-max-microvolt = <23000000>;
+ channel@0 {
+ reg = <0>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+ channel@1 {
+ reg = <1>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+ channel@2 {
+ reg = <2>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+ channel@3 {
+ reg = <3>;
+ adi,mode = <4>;
+ adi,ext-current-sense-resistor;
+ adi,slew = <0 64000 1>;
+ };
+};
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
