Hello Krzysztof,
just wanted to ask on which kernel branch the patchset is based on. At
least for me the set doesn't apply cleanly to 4.7-rc4.
With best wishes,
Tobias
Krzysztof Kozlowski wrote:
> Hi,
>
>
> Some time ago, Robert tried to add VBUS detection to extcon-usb-gpio
> driver [1]. There was a discussion about patch #2 ("extcon: usb-gpio:
> add support for VBUS detection").
>
> The final conclusion was that Chanwoo will add VBUS/ID notifiers [2].
> That unfortunately never happened so this patchset is a follow up.
>
> 1. Add VBUS/ID cable state notifiers to extcon, so USB controllers
> could use it.
> 2. Add VBUS detection to extcon-usb-gpio driver.
>
> Some parts are based on old Robert's work, some are new, some are
> reworked.
>
>
> Best regards,
> Krzysztof
>
>
> [1] http://thread.gmane.org/gmane.linux.kernel/1923192/focus=1923193
> [2] http://thread.gmane.org/gmane.linux.kernel/1923192/focus=1941152
>
>
> Krzysztof Kozlowski (5):
> Revert "extcon: usb-gpio: switch to use pm wakeirq apis"
> extcon: Add raw VBUS and ID cable states
> extcon: usb-gpio: Add support for VBUS detection
> ARM: exynos_defconfig: Enable EXTCON_USB_GPIO for Odroid XU3 USB OTG
> ARM: dts: exynos: Add extcon-usb-gpio node for Odroid XU3
>
> Robert Baldyga (2):
> Documentation: extcon: usb-gpio: update usb-gpio binding description
> extcon: usb-gpio: make debounce value configurable in devicetree
>
> .../devicetree/bindings/extcon/extcon-usb-gpio.txt | 28 ++++-
> arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 21 ++++
> arch/arm/boot/dts/exynos5422-odroidxu3.dts | 21 ++++
> arch/arm/configs/exynos_defconfig | 1 +
> drivers/extcon/extcon-usb-gpio.c | 138 +++++++++++++++++----
> drivers/extcon/extcon.c | 3 +
> include/linux/extcon.h | 8 +-
> 7 files changed, 190 insertions(+), 30 deletions(-)
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
