Now that we have a proper binding for Ethernet switches hanging off different buses, and a driver for the BCM53125 switch, add its Device Tree as a child MDIO node, at MDIO address 30 (Broadcom pseudo-PHY address) and describe the ports layout of the Lamobo R1 board. This switch is hanging off the GMAC MDIO controller, not the allwinner,sun4i-a10-mdio MDIO controller which is labeled "mdio" Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- Changes in v2: - change the unit specifier to use hexadecimal - name the GMAC MDIO controller label "mdio-gmac" - specify board name in subject Maxime, You can find the B53 driver and its binding here: https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=23c731e830009a51a39a7a558179007235c84eb7 arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 +++++++++++++++++++++++++++++-- 1 file changed, 57 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 5ee43d8bf174..99e71cca1da1 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -110,13 +110,67 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio-gmac { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + switch: ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + label = "lan2"; + }; + + port1: port@1 { + reg = <1>; + label = "lan3"; + }; + + port2: port@2 { + reg = <2>; + label = "lan4"; + }; + + port3: port@3 { + reg = <3>; + label = "wan"; + }; + + port4: port@4 { + reg = <4>; + label = "lan1"; + }; + + port8: port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html