Extend the driver to support Ricoh RN5T567. Support the additional
DCDC and slightly different voltage range of LDORTC1.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Acked-by: Mark Brown <broonie@xxxxxxxxxx>
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/regulator/Kconfig | 5 +++--
drivers/regulator/rn5t618-regulator.c | 40 +++++++++++++++++++++++++++++++----
include/linux/mfd/rn5t618.h | 1 +
3 files changed, 40 insertions(+), 6 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 144cbf5..5472694 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -636,10 +636,11 @@ config REGULATOR_RK808
outputs which can be controlled by i2c communication.
config REGULATOR_RN5T618
- tristate "Ricoh RN5T618 voltage regulators"
+ tristate "Ricoh RN5T567/618 voltage regulators"
depends on MFD_RN5T618
help
- Say y here to support the regulators found on Ricoh RN5T618 PMIC.
+ Say y here to support the regulators found on Ricoh RN5T567 or
+ RN5T618 PMIC.
config REGULATOR_RT5033
tristate "Richtek RT5033 Regulators"
diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c
index b85ceb8..9c930eb 100644
--- a/drivers/regulator/rn5t618-regulator.c
+++ b/drivers/regulator/rn5t618-regulator.c
@@ -46,6 +46,23 @@ static struct regulator_ops rn5t618_reg_ops = {
.vsel_mask = (vmask), \
}
+static struct regulator_desc rn5t567_regulators[] = {
+ /* DCDC */
+ REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
+ REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
+ REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500),
+ REG(DCDC4, DC4CTL, BIT(0), DC4DAC, 0xff, 600000, 3500000, 12500),
+ /* LDO */
+ REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000),
+ REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000),
+ REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
+ REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000),
+ REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
+ /* LDO RTC */
+ REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1200000, 3500000, 25000),
+ REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
+};
+
static struct regulator_desc rn5t618_regulators[] = {
/* DCDC */
REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
@@ -67,18 +84,33 @@ static int rn5t618_regulator_probe(struct platform_device *pdev)
struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
+ struct regulator_desc *regulators;
int i;
+ switch (rn5t618->variant) {
+ case RN5T567:
+ regulators = rn5t567_regulators;
+ break;
+ case RN5T618:
+ regulators = rn5t618_regulators;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ config.dev = pdev->dev.parent;
+ config.regmap = rn5t618->regmap;
+
for (i = 0; i < RN5T618_REG_NUM; i++) {
- config.dev = pdev->dev.parent;
- config.regmap = rn5t618->regmap;
+ if (!regulators[i].name)
+ continue;
rdev = devm_regulator_register(&pdev->dev,
- &rn5t618_regulators[i],
+ ®ulators[i],
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "failed to register %s regulator\n",
- rn5t618_regulators[i].name);
+ regulators[i].name);
return PTR_ERR(rdev);
}
}
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index 54179c2..cadc654 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -217,6 +217,7 @@ enum {
RN5T618_DCDC1,
RN5T618_DCDC2,
RN5T618_DCDC3,
+ RN5T618_DCDC4,
RN5T618_LDO1,
RN5T618_LDO2,
RN5T618_LDO3,
--
2.8.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
