Use the PMIC's repower capability for reboots. Register a restart handler and use a slightly elevated priority of 192 since the PMIC has suprior reset capability (causing a system wide reset). Signed-off-by: Stefan Agner <stefan@xxxxxxxx> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> --- drivers/mfd/rn5t618.c | 42 ++++++++++++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 6 deletions(-) diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c index 1831740..14f3b5f 100644 --- a/drivers/mfd/rn5t618.c +++ b/drivers/mfd/rn5t618.c @@ -12,11 +12,13 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/delay.h> #include <linux/i2c.h> #include <linux/mfd/core.h> #include <linux/mfd/rn5t618.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/reboot.h> #include <linux/regmap.h> static const struct mfd_cell rn5t618_cells[] = { @@ -50,17 +52,37 @@ static const struct regmap_config rn5t618_regmap_config = { }; static struct rn5t618 *rn5t618_pm_power_off; +static struct notifier_block rn5t618_restart_handler; -static void rn5t618_power_off(void) +static void rn5t618_trigger_poweroff_sequence(bool repower) { /* disable automatic repower-on */ regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT, - RN5T618_REPCNT_REPWRON, 0); + RN5T618_REPCNT_REPWRON, repower); /* start power-off sequence */ regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT, RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF); } +static void rn5t618_power_off(void) +{ + rn5t618_trigger_poweroff_sequence(false); +} + +static int rn5t618_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + rn5t618_trigger_poweroff_sequence(true); + + /* + * Repower factor detection on PMIC side is not instant. 1ms + * proved to be enouth time until reset takes effect. + */ + mdelay(1); + + return NOTIFY_DONE; +} + static const struct of_device_id rn5t618_of_match[] = { { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 }, { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 }, @@ -102,13 +124,21 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c, return ret; } + rn5t618_pm_power_off = priv; if (of_device_is_system_power_controller(i2c->dev.of_node)) { - if (!pm_power_off) { - rn5t618_pm_power_off = priv; + if (!pm_power_off) pm_power_off = rn5t618_power_off; - } else { + else dev_warn(&i2c->dev, "Poweroff callback already assigned\n"); - } + } + + rn5t618_restart_handler.notifier_call = rn5t618_restart; + rn5t618_restart_handler.priority = 192; + + ret = register_restart_handler(&rn5t618_restart_handler); + if (ret) { + dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret); + return ret; } return 0; -- 2.8.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html