add the clocks and clock-names in DT property, gpmi-io clock is
mandatory for all platforms, but some platforms, such as i.MX6Q may
need more extra clocks for submodules. More details please refer to the
SoC reference manual.
Signed-off-by: Han Xu <han.xu@xxxxxxx>
---
Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index d02acaf..a2fd034 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -13,6 +13,13 @@ Required properties:
and GPMI DMA channel ID.
Refer to dma.txt and fsl-mxs-dma.txt for details.
- dma-names: Must be "rx-tx".
+ - clocks : The clocks needed by the gpmi controller. This field varies
+ depends on the SoC design, "gpmi-io" is mandatory but some platforms may
+ need several extra clocks, such as i.MX6 series, which requires "gpmi_apb,
+ gpmi_bch, gpmi_bch_apb and per1_bch" for all submodules, while i.MX7 only
+ need gpmi_bch_apb. Please refer to the HW design manual.
+ - clock-names : the name of the clocks, please refer to the HW design
+ manual.
Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
@@ -51,6 +58,8 @@ gpmi-nand@8000c000 {
interrupt-names = "bch";
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
+ clocks = <&clks 50>,;
+ clock-names = "gpmi_io";
partition@0 {
...
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
