On Wednesday 22 June 2016 10:37 PM, David Lechner wrote:
> On 05/25/2016 06:15 AM, Sekhar Nori wrote:
>> On Tuesday 10 May 2016 10:14 PM, David Lechner wrote:
>>> On 05/10/2016 06:26 AM, Sergei Shtylyov wrote:
>>>> On 5/10/2016 2:46 AM, David Lechner wrote:
[...]
>>>>> +static struct platform_device da8xx_cfgchip_device = {
>>>>> + .name = "syscon",
>>>>> + .id = 0,
>>>>
>>>> Again, -1.
>>>>
>>>> [...]
>>>>
>>>> MBR, Sergei
>>>>
>>>
>>> I wish you would have noticed this when I first submitted it. I remember
>>> going back and forth about this. But it has been too long and I can't
>>> remember the reason why I chose to go this way.
>>>
>>> It seems like changing it broke something with either this one or the
>>> phy device and I opted to keep it this way on both to be consistent. For
>>> example, the USB devices both use id = 0 as well even though there are
>>> only one of each type.
>>
>> Agree with Sergei here. Can you confirm what broke exactly? I think the
>> USB needs to be fixed too.
>>
>> Thanks,
>> Sekhar
>>
>
> I have made the changes from id = 0 to id = -1. I'm not sure what broke
> before, but it is working now.
Thanks!
>
> Re: USB needing fixed, I'm not sure how to do this and I won't have time
> for at least the next 2 or 3 months to do anything about it. The problem
> is that the MUSB can't detect the ID pin. As a workaround, it is
> detecting the VBUS state and using that to determine the ID pin state.
> So, when you attach a self-powered device, it tells the VBUS to turn
> off, which in turn triggers the workaround to say that the ID pin has
> changed state.
I seem to be missing the original problem report. Can you provide a link
to the discussion?
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
