On Fri, Jun 24, 2016 at 1:48 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote: > Hi, > > On Sun, Jun 12, 2016 at 8:14 AM, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote: >> Now that we have a proper binding for Ethernet switches hanging off >> different buses, and a driver for the BCM53125 switch, add its Device >> Tree as a child MDIO node, at MDIO address 30 (Broadcom pseudo-PHY >> address) and describe the ports layout of the Lamobo R1 board. You should also mention the board in the commit subject line. ChenYu >> >> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> >> --- >> arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 +++++++++++++++++++++++++++++-- >> 1 file changed, 57 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts >> index 5ee43d8bf174..697582397dcf 100644 >> --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts >> +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts >> @@ -110,13 +110,67 @@ >> &gmac { >> pinctrl-names = "default"; >> pinctrl-0 = <&gmac_pins_rgmii_a>; >> - phy = <&phy1>; >> phy-mode = "rgmii"; >> phy-supply = <®_gmac_3v3>; >> status = "okay"; >> >> - phy1: ethernet-phy@1 { >> - reg = <1>; >> + fixed-link { >> + speed = <1000>; >> + full-duplex; >> + }; >> + >> + mdio1 { > > mdio will suffice. > >> + compatible = "snps,dwmac-mdio"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + switch: ethernet-switch@30 { > > 30 decimal or 0x30 hex? We typically use hex values here. > > Otherwise this patch looks good. You should send it to Maxime though. > > ChenYu > >> + compatible = "brcm,bcm53125"; >> + reg = <30>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + label = "lan2"; >> + }; >> + >> + port@1 { >> + reg = <1>; >> + label = "lan3"; >> + }; >> + >> + port@2 { >> + reg = <2>; >> + label = "lan4"; >> + }; >> + >> + port@3 { >> + reg = <3>; >> + label = "wan"; >> + }; >> + >> + port@4 { >> + reg = <4>; >> + label = "lan1"; >> + }; >> + >> + port@8 { >> + reg = <8>; >> + label = "cpu"; >> + ethernet = <&gmac>; >> + phy-mode = "rgmii"; >> + fixed-link { >> + speed = <1000>; >> + full-duplex; >> + }; >> + }; >> + }; >> + }; >> }; >> }; >> >> -- >> 2.7.4 >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html