From: Ondrej Jirman <megous@xxxxxxxxxx>
This patch adds the binding documentation for the sun8i_ths driver
Signed-off-by: Ondřej Jirman <megous@xxxxxxxxxx>
---
.../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
new file mode 100644
index 0000000..826cd57
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt
@@ -0,0 +1,31 @@
+* sun8i THS
+
+Required properties:
+- compatible : "allwinner,sun8i-h3-ths"
+- reg : Address range of the thermal registers and location of the calibration
+ value
+- resets : Must contain an entry for each entry in reset-names.
+ see ../reset/reset.txt for details
+- reset-names : Must include the name "ahb"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS
+ clock
+
+Optional properties:
+- nvmem-cells : Must contain an entry for each entry in nvmem-cell-names
+- nvmem-cell-names : Must contain "calibration" for the cell containing the
+ temperature calibration cell, if available
+
+Example:
+ths: ths@01c25000 {
+ #thermal-sensor-cells = <0>;
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x400>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&bus_rst 136>;
+ reset-names = "ahb";
+ clocks = <&bus_gates 72>, <&ths_clk>;
+ clock-names = "ahb", "ths";
+ nvmem-cells = <&ths_calibration>;
+ nvmem-cell-names = "calibration";
+};
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
