In preparation for adding pinctrl support for the DPAUX pads, add helpers functions for configuring the pads and controlling the power for the pads. Please note that although a simple if-statement could be used instead of a case statement for configuring the pads as there are only two possible modes, a case statement is used because when integrating with the pinctrl framework, we need to be able to handle invalid modes that could be passed. Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx> --- drivers/gpu/drm/tegra/dpaux.c | 81 +++++++++++++++++++++++++++---------------- 1 file changed, 51 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c index 0874a7e5b37b..4014ec57ed31 100644 --- a/drivers/gpu/drm/tegra/dpaux.c +++ b/drivers/gpu/drm/tegra/dpaux.c @@ -267,6 +267,51 @@ static irqreturn_t tegra_dpaux_irq(int irq, void *data) return ret; } +static void tegra_dpaux_pad_power_down(struct tegra_dpaux *dpaux) +{ + u32 value = tegra_dpaux_readl(dpaux, DPAUX_HYBRID_SPARE); + + value |= DPAUX_HYBRID_SPARE_PAD_POWER_DOWN; + + tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_SPARE); +} + +static void tegra_dpaux_pad_power_up(struct tegra_dpaux *dpaux) +{ + u32 value = tegra_dpaux_readl(dpaux, DPAUX_HYBRID_SPARE); + + value &= ~DPAUX_HYBRID_SPARE_PAD_POWER_DOWN; + + tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_SPARE); +} + +static int tegra_dpaux_pad_config(struct tegra_dpaux *dpaux, unsigned function) +{ + u32 value; + + switch (function) { + case DPAUX_HYBRID_PADCTL_MODE_AUX: + value = DPAUX_HYBRID_PADCTL_AUX_CMH(2) | + DPAUX_HYBRID_PADCTL_AUX_DRVZ(4) | + DPAUX_HYBRID_PADCTL_AUX_DRVI(0x18) | + DPAUX_HYBRID_PADCTL_AUX_INPUT_RCV | + DPAUX_HYBRID_PADCTL_MODE_AUX; + break; + case DPAUX_HYBRID_PADCTL_MODE_I2C: + value = DPAUX_HYBRID_PADCTL_I2C_SDA_INPUT_RCV | + DPAUX_HYBRID_PADCTL_I2C_SCL_INPUT_RCV | + DPAUX_HYBRID_PADCTL_MODE_I2C; + break; + default: + return -ENOTSUPP; + } + + tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_PADCTL); + tegra_dpaux_pad_power_up(dpaux); + + return 0; +} + static int tegra_dpaux_probe(struct platform_device *pdev) { struct tegra_dpaux *dpaux; @@ -372,15 +417,9 @@ static int tegra_dpaux_probe(struct platform_device *pdev) * is no possibility to perform the I2C mode configuration in the * HDMI path. */ - value = tegra_dpaux_readl(dpaux, DPAUX_HYBRID_SPARE); - value &= ~DPAUX_HYBRID_SPARE_PAD_POWER_DOWN; - tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_SPARE); - - value = tegra_dpaux_readl(dpaux, DPAUX_HYBRID_PADCTL); - value = DPAUX_HYBRID_PADCTL_I2C_SDA_INPUT_RCV | - DPAUX_HYBRID_PADCTL_I2C_SCL_INPUT_RCV | - DPAUX_HYBRID_PADCTL_MODE_I2C; - tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_PADCTL); + err = tegra_dpaux_pad_config(dpaux, DPAUX_HYBRID_PADCTL_MODE_I2C); + if (err < 0) + return err; /* enable and clear all interrupts */ value = DPAUX_INTR_AUX_DONE | DPAUX_INTR_IRQ_EVENT | @@ -408,12 +447,9 @@ assert_reset: static int tegra_dpaux_remove(struct platform_device *pdev) { struct tegra_dpaux *dpaux = platform_get_drvdata(pdev); - u32 value; /* make sure pads are powered down when not in use */ - value = tegra_dpaux_readl(dpaux, DPAUX_HYBRID_SPARE); - value |= DPAUX_HYBRID_SPARE_PAD_POWER_DOWN; - tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_SPARE); + tegra_dpaux_pad_power_down(dpaux); drm_dp_aux_unregister(&dpaux->aux); @@ -538,30 +574,15 @@ enum drm_connector_status drm_dp_aux_detect(struct drm_dp_aux *aux) int drm_dp_aux_enable(struct drm_dp_aux *aux) { struct tegra_dpaux *dpaux = to_dpaux(aux); - u32 value; - - value = DPAUX_HYBRID_PADCTL_AUX_CMH(2) | - DPAUX_HYBRID_PADCTL_AUX_DRVZ(4) | - DPAUX_HYBRID_PADCTL_AUX_DRVI(0x18) | - DPAUX_HYBRID_PADCTL_AUX_INPUT_RCV | - DPAUX_HYBRID_PADCTL_MODE_AUX; - tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_PADCTL); - value = tegra_dpaux_readl(dpaux, DPAUX_HYBRID_SPARE); - value &= ~DPAUX_HYBRID_SPARE_PAD_POWER_DOWN; - tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_SPARE); - - return 0; + return tegra_dpaux_pad_config(dpaux, DPAUX_HYBRID_PADCTL_MODE_AUX); } int drm_dp_aux_disable(struct drm_dp_aux *aux) { struct tegra_dpaux *dpaux = to_dpaux(aux); - u32 value; - value = tegra_dpaux_readl(dpaux, DPAUX_HYBRID_SPARE); - value |= DPAUX_HYBRID_SPARE_PAD_POWER_DOWN; - tegra_dpaux_writel(dpaux, value, DPAUX_HYBRID_SPARE); + tegra_dpaux_pad_power_down(dpaux); return 0; } -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html