On Thu, Jun 23, 2016 at 12:33 AM, Simon Horman <horms@xxxxxxxxxxxx> wrote:
> On Wed, Jun 22, 2016 at 10:52:04PM +0300, Sergei Shtylyov wrote:
>> I've just downloaded and opened rev2.00 manual, and still, there's no
>> CPG registers other than FRQCRB on V2H.
>>
>> >It does, however, provide RCAN and ADSP which are supported by the CPG
>> >driver. You may wish to add them now for completeness though from my point
>> >of view they could also be added later when they are used.
>>
>> My copy of the manual says there's no ADSP on V2H, and thus no ADSP clock.
>
> I was looking at Figure 7.1c. Perhaps it is inaccurate.
Probably, the ADSP is missing for V2H in all other sections of the datasheet:
- There's no ADSP clock in Table 7.2c,
- ADSPCKCR does not exist according to Table 7.10,
- There are no ADSP MSSR bits, interrupts, or micro-TLBs,
- The audio and ADSP modules do not exist.
Of course that's the datasheet, there may still be actual hardware listening
when you try to talk to it ;-)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
