Re: [PATCHv4 4/7] Documentation: dt: socfpga: Add Arria10 Ethernet binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Rob,

On 06/21/2016 08:33 AM, Rob Herring wrote:
On Mon, Jun 20, 2016 at 09:50:49AM -0500, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>

Add the device tree bindings needed to support the Altera Ethernet
FIFO buffers on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
v2  No Change
v3  Change to common compatible string based on maintainer comments
     Add local IRQ values.
v4  Add compatible string for parent node.
---
  .../bindings/arm/altera/socfpga-eccmgr.txt         |   24 ++++++++++++++++++++
  1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 15eb0df..7c714ba 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -82,6 +82,14 @@ Required Properties:
  - interrupts : Should be single bit error interrupt, then double bit error
  	interrupt, in this order.

+Ethernet FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-eth-mac-ecc"
+- reg        : Address and size for ECC block registers.
+- parent     : phandle to parent (altr,socfpga-stmmac) Ethernet node.

Sorry if I wasn't clear before, but I was suggesting changing 'parent'
to 'altr,ethernet-mac':

altr,ethernet-mac = <&gmac0>;

Rob

Ahh, I see what you're saying.

I used parent as the tag because I have a generic function for validating that the parent status is "okay" using the "parent" string in my validate_parent_available() function (see below).

I will be submitting other peripheral FIFOs with EDAC protection in future patches (USB, DMA, etc).

static int validate_parent_available(struct device_node *np)
{
	struct device_node *parent;
	int ret = 0;

	/* Ensure parent device is enabled if parent node exists */
	parent = of_parse_phandle(np, "parent", 0);
	if (parent && !of_device_is_available(parent))
		ret = -ENODEV;
	of_node_put(parent);
	return ret;
}


I can change this to using a passed in data string but the code won't be as straightforward.

Thanks for reviewing,

Thor
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux