RE: [PATCHv3] usb: chipidea: add support for USB OTG controller on TI-NSPIRE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




 
> 
> From: Daniel Tang <dt.tangr@xxxxxxxxx>
> 
> The USB controller in TI-NSPIRE calculators are based off either
> Freescale's
> USB OTG controller or the USB controller found in the IMX233, both of
> which
> are Chipidea compatible.
> 
> This patch adds a device tree binding for the controller.
> 
> Signed-off-by: Daniel Tang <dt.tangr@xxxxxxxxx>
> ---
> 
> Changelog v3:
>  * Removed redundant module aliases
> 
> Changelog v2:
>  * Rename ci13xxx to ci_hdrc
>  * Fixed alignment issues
> 
> .../devicetree/bindings/usb/ci-hdrc-nspire.txt     | 17 +++++
>  drivers/usb/chipidea/Makefile                      |  1 +
>  drivers/usb/chipidea/ci_hdrc_nspire.c              | 72
> ++++++++++++++++++++++
>  3 files changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-
> nspire.txt
>  create mode 100644 drivers/usb/chipidea/ci_hdrc_nspire.c
> 
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
> b/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
> new file mode 100644
> index 0000000..5ba8e90
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-nspire.txt
> @@ -0,0 +1,17 @@
> +* TI-Nspire USB OTG Controller
> +
> +Required properties:
> +- compatible: Should be "zevio,nspire-usb"
> +- reg: Should contain registers location and length
> +- interrupts: Should contain controller interrupt
> +
> +Recommended properies:
> +- vbus-supply: regulator for vbus
> +
> +Examples:
> +		usb0: usb@B0000000 {
> +			reg = <0xB0000000 0x1000>;
> +			compatible = "zevio,nspire-usb";
> +			interrupts = <8>;
> +			vbus-supply = <&vbus_reg>;
> +		};
> diff --git a/drivers/usb/chipidea/Makefile
> b/drivers/usb/chipidea/Makefile
> index a99d980..245ea4d 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG)	+= debug.o
>  # Glue/Bridge layers go here
> 
>  obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
> +obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_nspire.o
> 
>  # PCI doesn't provide stubs, need to check
>  ifneq ($(CONFIG_PCI),)
> diff --git a/drivers/usb/chipidea/ci_hdrc_nspire.c
> b/drivers/usb/chipidea/ci_hdrc_nspire.c
> new file mode 100644
> index 0000000..517ce41
> --- /dev/null
> +++ b/drivers/usb/chipidea/ci_hdrc_nspire.c
> @@ -0,0 +1,72 @@
> +/*
> + *	Copyright (C) 2013 Daniel Tang <tangrs@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + *
> + * Based off drivers/usb/chipidea/ci_hdrc_msm.c
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/chipidea.h>
> +
> +#include "ci.h"
> +
> +static struct ci_hdrc_platform_data ci_hdrc_nspire_platdata = {
> +	.name			= "ci_hdrc_nspire",
> +	.flags			= CI_HDRC_REGS_SHARED,
> +	.capoffset		= DEF_CAPOFFSET,
> +};
> +
> +static int ci_hdrc_nspire_probe(struct platform_device *pdev)
> +{
> +	struct platform_device *ci_pdev;
> +
> +	dev_dbg(&pdev->dev, "ci_hdrc_nspire_probe\n");
> +
> +	ci_pdev = ci_hdrc_add_device(&pdev->dev,
> +				pdev->resource, pdev->num_resources,
> +				&ci_hdrc_nspire_platdata);
> +
> +	if (IS_ERR(ci_pdev)) {
> +		dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
> +		return PTR_ERR(ci_pdev);
> +	}
> +
> +	platform_set_drvdata(pdev, ci_pdev);
> +
> +	return 0;
> +}
> +
> +static int ci_hdrc_nspire_remove(struct platform_device *pdev)
> +{
> +	struct platform_device *ci_pdev = platform_get_drvdata(pdev);
> +
> +	ci_hdrc_remove_device(ci_pdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ci_hdrc_nspire_dt_ids[] = {
> +	{ .compatible = "zevio,nspire-usb", },
> +	{ /* sentinel */ }
> +};
> +
> +static struct platform_driver ci_hdrc_nspire_driver = {
> +	.probe = ci_hdrc_nspire_probe,
> +	.remove = ci_hdrc_nspire_remove,
> +	.driver = {
> +		.name = "nspire_usb",
> +		.owner = THIS_MODULE,
> +		.of_match_table = ci_hdrc_nspire_dt_ids,
> +	},
> +};
> +
> +MODULE_DEVICE_TABLE(of, ci_hdrc_nspire_dt_ids);
> +module_platform_driver(ci_hdrc_nspire_driver);
> +
> +MODULE_LICENSE("GPL v2");
> --

You can decide to add module alias or not.

Acked-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
for driver part.

I haven't seen your dts patch.

Peter



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux