On Sun, Nov 24, 2013 at 12:52:58PM +0100, Arnaud Ebalard wrote: > Hi, > > Jason Cooper <jason@xxxxxxxxxxxxxx> writes: > > > On Tue, Nov 12, 2013 at 08:46:48PM +0100, Arnaud Ebalard wrote: > >> > >> All hardware parts of the (mv78230 Armada XP based) NETGEAR ReadyNAS > >> 2120 are supported by mainline kernel (USB 3.0 and eSATA rear ports, > >> USB 2.0 front port, Gigabit controller and PHYs for the two rear ports, > >> serial port, LEDs, Buttons, 88SE9170 SATA controllers, three G762 fan > >> controllers, G751 temperature sensor) except for: > >> > >> - the Intersil ISL12057 I2C RTC Chip, > >> - the Armada NAND controller. > >> > >> Support for both of those is currently work in progress and does not > >> prevent boot. > >> > >> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> > >> Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx> > >> --- > > ... > >> arch/arm/boot/dts/Makefile | 1 + > >> arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 288 +++++++++++++++++++++++++ > >> 2 files changed, 289 insertions(+) > >> create mode 100644 arch/arm/boot/dts/armada-xp-netgear-rn2120.dts > > > > Applied to mvebu/dt > > Thanks, Jason. Based on the response to the question raised by Jason > Gunthorpe regarding PHY compatible string [1], I'll keep in mind to send > you a patch at some point (.dts file for RN2120 also has compatible = > "marvell,88e1318s") if needed. d*mn. You're right. I missed that. I'll drop this from mvebu/dt until that's resolved. I don't want to inadvertently force supporting a compatible string we don't want. Please resend this once that's resolved. thx, Jason. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html