On Mon, 2016-06-20 at 18:41 +0800, CK Hu wrote: > Hi, HS: > > One comment inline. > > On Mon, 2016-05-30 at 11:19 +0800, HS Liao wrote: > > This patch is first version of Mediatek Command Queue(CMDQ) driver. The > > CMDQ is used to help read/write registers with critical time limitation, > > such as updating display configuration during the vblank. It controls > > Global Command Engine (GCE) hardware to achieve this requirement. > > Currently, CMDQ only supports display related hardwares, but we expect > > it can be extended to other hardwares for future requirements. > > > > Signed-off-by: HS Liao <hs.liao@xxxxxxxxxxxx> > > Signed-off-by: CK Hu <ck.hu@xxxxxxxxxxxx> > > --- > > drivers/soc/mediatek/Kconfig | 10 + > > drivers/soc/mediatek/Makefile | 1 + > > drivers/soc/mediatek/mtk-cmdq.c | 943 ++++++++++++++++++++++++++++++++++++++++ > > include/soc/mediatek/cmdq.h | 197 +++++++++ > > 4 files changed, 1151 insertions(+) > > create mode 100644 drivers/soc/mediatek/mtk-cmdq.c > > create mode 100644 include/soc/mediatek/cmdq.h > > > > diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig > > index 0a4ea80..c4ad75c 100644 > > --- a/drivers/soc/mediatek/Kconfig > > +++ b/drivers/soc/mediatek/Kconfig > > @@ -1,6 +1,16 @@ > > # > > # MediaTek SoC drivers > > # > > +config MTK_CMDQ > > + bool "MediaTek CMDQ Support" > > + depends on ARCH_MEDIATEK || COMPILE_TEST > > + select MTK_INFRACFG > > + help > > + Say yes here to add support for the MediaTek Command Queue (CMDQ) > > + driver. The CMDQ is used to help read/write registers with critical > > + time limitation, such as updating display configuration during the > > + vblank. > > + > > config MTK_INFRACFG > > bool "MediaTek INFRACFG Support" > > depends on ARCH_MEDIATEK || COMPILE_TEST > > diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile > > index 12998b0..f7397ef 100644 > > --- a/drivers/soc/mediatek/Makefile > > +++ b/drivers/soc/mediatek/Makefile > > [Snip...] > > > + > > +static int cmdq_eng_get_thread(u64 flag) > > +{ > > + if (flag & BIT_ULL(CMDQ_ENG_DISP_DSI0)) > > + return CMDQ_THR_DISP_MAIN_IDX; > > + else if (flag & BIT_ULL(CMDQ_ENG_DISP_DPI0)) > > + return CMDQ_THR_DISP_SUB_IDX; > > + else > > + return CMDQ_THR_DISP_MISC_IDX; > > +} > > I think cmdq should not have knowledge of client. These statement show > that cmdq know that DSI0-tasks is different with DPI0-tasks. I propose > the 'session' to replace engine flag. For example, main display create > one cmdq_session and external display create another cmdq_session. For > client driver, every tasks created by main display is bound to main > display session. For cmdq driver, it should dynamically bind a session > to a HW thread, and then dispatch tasks of this session to this HW > thread. After HW thread run out of tasks of this session, detach this > session with this thread. > For the problem of remove wfe cmd, I think a session can have a property > of merge_wfe_cmd. For display session, session->merge_wfe_cmd = true. > For other client, it's false. Hi CK, I think your suggestion is similar to CMDQ 'scenarios', which was removed from CMDQ v2. Daniel suggests to use engine flags instead of scenarios. Quote from https://patchwork.kernel.org/patch/8068311/ . 'Instead of encoding policy (these arbitrary "scenarios"), perhaps the cmdq driver should just provide these flag bits, and the display subsystem can use them to build the "flag" parameter itself. After all, the exact configuration of mmsys components is somewhat flexible.' Therefore, it would be better to discuss with Daniel before we change it. Hi Daniel, Do you think we should use scenarios or sessions instead of flags? Thanks, HS > Here is the sample code to create cmdq_rec with session. > > merge_wfe_cmd = true; > cmdq_session_create(merge_wfe_cmd, &primary_display_session); > cmdq_rec_create(dev, primary_display_session, &rec); > > > Therefore, the below definition can be removed. > > > + > > +enum cmdq_eng { > > + CMDQ_ENG_DISP_AAL, > > + CMDQ_ENG_DISP_COLOR0, > > + CMDQ_ENG_DISP_COLOR1, > > + CMDQ_ENG_DISP_DPI0, > > + CMDQ_ENG_DISP_DSI0, > > + CMDQ_ENG_DISP_DSI1, > > + CMDQ_ENG_DISP_GAMMA, > > + CMDQ_ENG_DISP_OD, > > + CMDQ_ENG_DISP_OVL0, > > + CMDQ_ENG_DISP_OVL1, > > + CMDQ_ENG_DISP_PWM0, > > + CMDQ_ENG_DISP_PWM1, > > + CMDQ_ENG_DISP_RDMA0, > > + CMDQ_ENG_DISP_RDMA1, > > + CMDQ_ENG_DISP_RDMA2, > > + CMDQ_ENG_DISP_UFOE, > > + CMDQ_ENG_DISP_WDMA0, > > + CMDQ_ENG_DISP_WDMA1, > > + CMDQ_ENG_MAX, > > +}; > > + > > > Regards, > CK > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html