Re: [PATCHv3 6/7] EDAC, altera: Add Arria10 Ethernet EDAC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Jun 13, 2016 at 04:19:11PM -0500, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
> From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> 
> Add Altera Arria10 Ethernet FIFO memory EDAC support. Update
> to support a common compatibility string for all ethernet
> FIFOs in the DT.
> 
> Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> ---
> v2  Remove (void *) cast from altr_edac_device_of_match[]
>     Addition of panic flag to ethernet private data.
> v3  Use common compatiblity string.
>     Simplify socfpga_init_ethernet_ecc().
> ---
>  drivers/edac/Kconfig       |    7 +++++++
>  drivers/edac/altera_edac.c |   38 ++++++++++++++++++++++++++++++++++++--
>  drivers/edac/altera_edac.h |    3 +++
>  3 files changed, 46 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 6ca7474..d0c1dab 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -391,6 +391,13 @@ config EDAC_ALTERA_OCRAM
>  	  Support for error detection and correction on the
>  	  Altera On-Chip RAM Memory for Altera SoCs.
>  
> +config EDAC_ALTERA_ETHERNET
> +	bool "Altera Ethernet FIFO ECC"
> +	depends on EDAC_ALTERA=y
> +	help
> +	  Support for error detection and correction on the
> +	  Altera Ethernet FIFO Memory for Altera SoCs.
> +
>  config EDAC_SYNOPSYS
>  	tristate "Synopsys DDR Memory Controller"
>  	depends on EDAC_MM_EDAC && ARCH_ZYNQ
> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
> index f27bb29..14f99ae 100644
> --- a/drivers/edac/altera_edac.c
> +++ b/drivers/edac/altera_edac.c
> @@ -1260,6 +1260,34 @@ const struct edac_device_prv_data a10_l2ecc_data = {
>  
>  #endif	/* CONFIG_EDAC_ALTERA_L2C */
>  
> +/********************* Ethernet Device Functions ********************/
> +
> +#ifdef CONFIG_EDAC_ALTERA_ETHERNET
> +
> +const struct edac_device_prv_data a10_enet0rxecc_data = {

This needs to be "static const" and then you don't need to init panic to
false.

Your other edac_device_prv_data things are not static too, please
convert them in a separate patch too.

-- 
Regards/Gruss,
    Boris.

ECO tip #101: Trim your mails when you reply.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux