Re: [RFC PATCH 11/13] arm64: tegra: Add SOR power-domain node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Jun 17, 2016 at 01:03:45PM +0100, Jon Hunter wrote:
> Add node for SOR power-domain for Tegra210 and populate the SOR
> power-domain phandle for SOR and DPAUX nodes that are dependent
> on this power-domain.
> 
> Please note that although neither the SOR or DPAUX drivers currently
> support runtime power-management, by populating the power-domain node
> the SOR power-domain will be turned on before probing SOR or DPAUX
> devices and kept on while the devices are bound.
> 
> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> index ebf44f4059f8..94f780b43037 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
> @@ -34,6 +34,7 @@
>  			clock-names = "dpaux", "parent";
>  			resets = <&tegra_car 207>;
>  			reset-names = "dpaux";
> +			power-domains = <&pd_sor>;
>  			status = "disabled";
>  		};
>  
> @@ -154,6 +155,7 @@
>  			clock-names = "sor", "parent", "dp", "safe";
>  			resets = <&tegra_car 182>;
>  			reset-names = "sor";
> +			power-domains = <&pd_sor>;
>  			status = "disabled";
>  		};
>  
> @@ -168,6 +170,7 @@
>  			clock-names = "sor", "parent", "dp", "safe";
>  			resets = <&tegra_car 183>;
>  			reset-names = "sor";
> +			power-domains = <&pd_sor>;
>  			status = "disabled";
>  		};
>  
> @@ -180,6 +183,7 @@
>  			clock-names = "dpaux", "parent";
>  			resets = <&tegra_car 181>;
>  			reset-names = "dpaux";
> +			power-domains = <&pd_sor>;
>  			status = "disabled";
>  		};
>  
> @@ -592,6 +596,20 @@
>  				resets = <&tegra_car 198>;
>  				#power-domain-cells = <0>;
>  			};
> +
> +			pd_sor: sor {
> +				clocks = <&tegra_car TEGRA210_CLK_SOR0>,
> +					 <&tegra_car TEGRA210_CLK_DSIA>,
> +					 <&tegra_car TEGRA210_CLK_DSIB>,
> +					 <&tegra_car TEGRA210_CLK_MIPI_CAL>,

Does this mean that all of these clocks will be running while the SOR
partition is enabled? Seems like a waste because we rarely need MIPI_CAL
and DSIA and DSIB are completely unused on boards that for example have
only an HDMI output.

I vaguely remember the power domain driver only making sure these are
enabled during the partition power transitions, so perhaps my concerns
aren't justified?

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux