From: Chris Lapa <chris@xxxxxxxxxxx>
Adds support for device tree to setup a max8903 battery charger. DC and USB
validity are determined by looking the presence of the dok and uok gpios.
Signed-off-by: Chris Lapa <chris@xxxxxxxxxxx>
---
drivers/power/max8903_charger.c | 217 +++++++++++++++++++++++++++-------------
1 file changed, 145 insertions(+), 72 deletions(-)
diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
index 5ddc667..3c59213 100644
--- a/drivers/power/max8903_charger.c
+++ b/drivers/power/max8903_charger.c
@@ -23,6 +23,9 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/power_supply.h>
#include <linux/platform_device.h>
@@ -75,6 +78,7 @@ static int max8903_get_property(struct power_supply *psy,
default:
return -EINVAL;
}
+
return 0;
}
@@ -179,48 +183,116 @@ static irqreturn_t max8903_fault(int irq, void *_data)
return IRQ_HANDLED;
}
+static struct max8903_pdata *max8903_parse_dt_data(
+ struct device *dev)
+{
+ struct device_node *of_node = dev->of_node;
+ struct max8903_pdata *pdata = NULL;
+
+ if (!of_node)
+ return NULL;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata),
+ GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ pdata->dc_valid = false;
+ pdata->usb_valid = false;
+
+ pdata->cen = of_get_named_gpio(of_node, "cen-gpios", 0);
+ if (!gpio_is_valid(pdata->cen))
+ pdata->cen = -EINVAL;
+
+ pdata->chg = of_get_named_gpio(of_node, "chg-gpios", 0);
+ if (!gpio_is_valid(pdata->chg))
+ pdata->chg = -EINVAL;
+
+ pdata->flt = of_get_named_gpio(of_node, "flt-gpios", 0);
+ if (!gpio_is_valid(pdata->flt))
+ pdata->flt = -EINVAL;
+
+ pdata->usus = of_get_named_gpio(of_node, "usus-gpios", 0);
+ if (!gpio_is_valid(pdata->usus))
+ pdata->usus = -EINVAL;
+
+ pdata->dcm = of_get_named_gpio(of_node, "dcm-gpios", 0);
+ if (!gpio_is_valid(pdata->dcm))
+ pdata->dcm = -EINVAL;
+
+ pdata->dok = of_get_named_gpio(of_node, "dok-gpios", 0);
+ if (!gpio_is_valid(pdata->dok))
+ pdata->dok = -EINVAL;
+ else
+ pdata->dc_valid = true;
+
+ pdata->uok = of_get_named_gpio(of_node, "uok-gpios", 0);
+ if (!gpio_is_valid(pdata->uok))
+ pdata->uok = -EINVAL;
+ else
+ pdata->usb_valid = true;
+
+ return pdata;
+}
+
static int max8903_probe(struct platform_device *pdev)
{
- struct max8903_data *data;
+ struct max8903_data *charger;
struct device *dev = &pdev->dev;
- struct max8903_pdata *pdata = pdev->dev.platform_data;
struct power_supply_config psy_cfg = {};
int ret = 0;
int gpio;
int ta_in = 0;
int usb_in = 0;
- if (pdata == NULL) {
+ charger = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->pdata = pdev->dev.platform_data;
+ if (IS_ENABLED(CONFIG_OF) && !charger->pdata && dev->of_node)
+ charger->pdata = max8903_parse_dt_data(dev);
+
+ if (!charger->pdata) {
dev_err(dev, "No platform data.\n");
return -EINVAL;
}
- data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
+ charger->dev = dev;
- data->pdata = pdev->dev.platform_data;
- data->dev = dev;
- platform_set_drvdata(pdev, data);
+ charger->fault = false;
+ charger->ta_in = ta_in;
+ charger->usb_in = usb_in;
- if (pdata->dc_valid == false && pdata->usb_valid == false) {
+ charger->psy_desc.name = "max8903_charger";
+ charger->psy_desc.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+ ((usb_in) ? POWER_SUPPLY_TYPE_USB :
+ POWER_SUPPLY_TYPE_BATTERY);
+ charger->psy_desc.get_property = max8903_get_property;
+ charger->psy_desc.properties = max8903_charger_props;
+ charger->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+ platform_set_drvdata(pdev, charger);
+
+ if (charger->pdata->dc_valid == false && charger->pdata->usb_valid == false) {
dev_err(dev, "No valid power sources.\n");
return -EINVAL;
}
- if (pdata->dc_valid) {
- if (gpio_is_valid(pdata->dok)) {
+
+ if (charger->pdata->dc_valid) {
+ if (gpio_is_valid(charger->pdata->dok)) {
ret = devm_gpio_request(dev,
- pdata->dok,
- data->psy_desc.name);
+ charger->pdata->dok,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for dok: %d err %d\n",
- pdata->dok, ret);
+ charger->pdata->dok, ret);
return -EINVAL;
}
- gpio = pdata->dok; /* PULL_UPed Interrupt */
+ gpio = charger->pdata->dok; /* PULL_UPed Interrupt */
ta_in = gpio_get_value(gpio) ? 0 : 1;
} else {
dev_err(dev, "When DC is wired, DOK should"
@@ -229,34 +301,34 @@ static int max8903_probe(struct platform_device *pdev)
}
}
- if (gpio_is_valid(pdata->dcm)) {
+ if (gpio_is_valid(charger->pdata->dcm)) {
ret = devm_gpio_request(dev,
- pdata->dcm,
- data->psy_desc.name);
+ charger->pdata->dcm,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for dcm: %d err %d\n",
- pdata->dcm, ret);
+ charger->pdata->dcm, ret);
return -EINVAL;
}
- gpio = pdata->dcm; /* Output */
+ gpio = charger->pdata->dcm; /* Output */
gpio_set_value(gpio, ta_in);
}
- if (pdata->usb_valid) {
- if (gpio_is_valid(pdata->uok)) {
+ if (charger->pdata->usb_valid) {
+ if (gpio_is_valid(charger->pdata->uok)) {
ret = devm_gpio_request(dev,
- pdata->uok,
- data->psy_desc.name);
+ charger->pdata->uok,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for uok: %d err %d\n",
- pdata->uok, ret);
+ charger->pdata->uok, ret);
return -EINVAL;
}
- gpio = pdata->uok;
+ gpio = charger->pdata->uok;
usb_in = gpio_get_value(gpio) ? 0 : 1;
} else {
dev_err(dev, "When USB is wired, UOK should be wired."
@@ -266,111 +338,105 @@ static int max8903_probe(struct platform_device *pdev)
}
- if (gpio_is_valid(pdata->cen)) {
+ if (gpio_is_valid(charger->pdata->cen)) {
ret = devm_gpio_request(dev,
- pdata->cen,
- data->psy_desc.name);
+ charger->pdata->cen,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for cen: %d err %d\n",
- pdata->cen, ret);
+ charger->pdata->cen, ret);
return -EINVAL;
}
- gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
+ gpio_set_value(charger->pdata->cen, (ta_in || usb_in) ? 0 : 1);
}
- if (gpio_is_valid(pdata->chg)) {
+ if (gpio_is_valid(charger->pdata->chg)) {
ret = devm_gpio_request(dev,
- pdata->chg,
- data->psy_desc.name);
+ charger->pdata->chg,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for chg: %d err %d\n",
- pdata->chg, ret);
+ charger->pdata->chg, ret);
return -EINVAL;
}
}
- if (gpio_is_valid(pdata->flt)) {
+ if (gpio_is_valid(charger->pdata->flt)) {
ret = devm_gpio_request(dev,
- pdata->flt,
- data->psy_desc.name);
+ charger->pdata->flt,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for flt: %d err %d\n",
- pdata->flt, ret);
+ charger->pdata->flt, ret);
return -EINVAL;
}
}
- if (gpio_is_valid(pdata->usus)) {
+ if (gpio_is_valid(charger->pdata->usus)) {
ret = devm_gpio_request(dev,
- pdata->usus,
- data->psy_desc.name);
+ charger->pdata->usus,
+ charger->psy_desc.name);
if (ret) {
dev_err(dev,
"Failed GPIO request for usus: %d err %d\n",
- pdata->usus, ret);
+ charger->pdata->usus, ret);
return -EINVAL;
}
}
- data->fault = false;
- data->ta_in = ta_in;
- data->usb_in = usb_in;
-
- data->psy_desc.name = "max8903_charger";
- data->psy_desc.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS :
- ((usb_in) ? POWER_SUPPLY_TYPE_USB :
- POWER_SUPPLY_TYPE_BATTERY);
- data->psy_desc.get_property = max8903_get_property;
- data->psy_desc.properties = max8903_charger_props;
- data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
-
- psy_cfg.drv_data = data;
+ psy_cfg.of_node = dev->of_node;
+ psy_cfg.drv_data = charger;
- data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg);
- if (IS_ERR(data->psy)) {
+ charger->psy = devm_power_supply_register(dev,
+ &charger->psy_desc,
+ &psy_cfg);
+ if (IS_ERR(charger->psy)) {
dev_err(dev, "failed: power supply register.\n");
- return PTR_ERR(data->psy);
+ return PTR_ERR(charger->psy);
}
- if (pdata->dc_valid) {
- ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->dok),
+ if (charger->pdata->dc_valid) {
+ ret = devm_request_threaded_irq(dev,
+ gpio_to_irq(charger->pdata->dok),
NULL, max8903_dcin,
IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- "MAX8903 DC IN", data);
+ "MAX8903 DC IN", charger);
if (ret) {
dev_err(dev, "Cannot request irq %d for DC (%d)\n",
- gpio_to_irq(pdata->dok), ret);
+ gpio_to_irq(charger->pdata->dok), ret);
return ret;
}
}
- if (pdata->usb_valid) {
- ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->uok),
+ if (charger->pdata->usb_valid) {
+ ret = devm_request_threaded_irq(dev,
+ gpio_to_irq(charger->pdata->uok),
NULL, max8903_usbin,
IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- "MAX8903 USB IN", data);
+ "MAX8903 USB IN", charger);
if (ret) {
dev_err(dev, "Cannot request irq %d for USB (%d)\n",
- gpio_to_irq(pdata->uok), ret);
+ gpio_to_irq(charger->pdata->uok), ret);
return ret;
}
}
- if (gpio_is_valid(pdata->flt)) {
- ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt),
+ if (gpio_is_valid(charger->pdata->flt)) {
+ ret = devm_request_threaded_irq(dev,
+ gpio_to_irq(charger->pdata->flt),
NULL, max8903_fault,
IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- "MAX8903 Fault", data);
+ "MAX8903 Fault", charger);
if (ret) {
dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
- gpio_to_irq(pdata->flt), ret);
+ gpio_to_irq(charger->pdata->flt), ret);
return ret;
}
}
@@ -378,10 +444,17 @@ static int max8903_probe(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id max8903_match_ids[] = {
+ { .compatible = "maxim,max8903-charger", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max8903_match_ids);
+
static struct platform_driver max8903_driver = {
.probe = max8903_probe,
.driver = {
.name = "max8903-charger",
+ .of_match_table = max8903_match_ids
},
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
