The clock IP used on the Maxim PMICs max77686 and max77802 are same. The configuration of clock register is also same except the number of clocks. Part of common code utilisation, there is 3 files for these chips clock driver, one for common and two files for driver registration. Combine both drivers into single file and move common code into same common file reduces the 2 files and make max77686 and max77802 clock driver in single fine. This driver does not depends on the parent driver structure. The regmap handle is acquired through regmap APIs for the register access. After comining the driver and DT files, extend the support to MAX77620. This series is based on discussion from the series clk: max77620: Add clock driver for MAX77620/MAX20024 On this series, it is proposed to combine all files together. Laxman Dewangan (5): clk: max77686: Combine Maxim max77686 and max77802 driver clk: Combine DT binding doc for max77686 and max77802 clk: max77686: Add DT binding details for PMIC MAX77620 clk: max77686: Add support for MAX77620 clocks ARM: config: Get rid of config COMMON_CLK_MAX77802 .../devicetree/bindings/clock/maxim,max77686.txt | 108 +++++++-- .../devicetree/bindings/clock/maxim,max77802.txt | 44 ---- arch/arm/configs/exynos_defconfig | 1 - arch/arm/configs/multi_v7_defconfig | 1 - drivers/clk/Kconfig | 18 +- drivers/clk/Makefile | 2 - drivers/clk/clk-max-gen.c | 194 ---------------- drivers/clk/clk-max-gen.h | 32 --- drivers/clk/clk-max77686.c | 257 +++++++++++++++++++-- drivers/clk/clk-max77802.c | 96 -------- include/dt-bindings/mfd/max77620.h | 4 + 11 files changed, 335 insertions(+), 422 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt delete mode 100644 drivers/clk/clk-max-gen.c delete mode 100644 drivers/clk/clk-max-gen.h delete mode 100644 drivers/clk/clk-max77802.c -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html