This patch adds support for Freescale MMA7455L/MMA7456L 3-Axis
Accelerometer connected to I2C bus. Driver can be loaded ether
with or without DT support. The basic parameters of the driver
can be changed through sysfs.
Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx>
---
.../devicetree/bindings/input/fsl-mma745xl.txt | 16 +
drivers/input/misc/Kconfig | 8 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/mma745xl.c | 490 +++++++++++++++++++++
4 files changed, 515 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/fsl-mma745xl.txt
create mode 100644 drivers/input/misc/mma745xl.c
diff --git a/Documentation/devicetree/bindings/input/fsl-mma745xl.txt b/Documentation/devicetree/bindings/input/fsl-mma745xl.txt
new file mode 100644
index 0000000..68feeb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl-mma745xl.txt
@@ -0,0 +1,16 @@
+* Freescale MMA7455L/MMA7456L Three Axis Accelerometer
+
+Required properties:
+- compatible: Should contain "fsl,mma7455l".
+- reg: The I2C address of device.
+- interrupt-parent: Defines the parent interrupt controller.
+- interrupts: Should contain the IRQ specifiers for INT1 and INT2 pins.
+
+Example:
+ accelerometer: mma7455l@1d {
+ compatible = "fsl,mma7455l";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 GPIO_ACTIVE_HIGH>,
+ <6 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5f4967d..ecd3a50 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -176,6 +176,14 @@ config INPUT_MC13783_PWRBUTTON
To compile this driver as a module, choose M here: the module
will be called mc13783-pwrbutton.
+config INPUT_MMA745XL
+ tristate "MMA745xL - Freescale's 3-Axis, Digital Acceleration Sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y here if you want to support Freescale's MMA7455L/MMA7456L
+ Three Axis Accelerometer through I2C interface.
+
config INPUT_MMA8450
tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0ebfb6d..10b2c12 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
+obj-$(CONFIG_INPUT_MMA745XL) += mma745xl.o
obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
diff --git a/drivers/input/misc/mma745xl.c b/drivers/input/misc/mma745xl.c
new file mode 100644
index 0000000..4e4e847
--- /dev/null
+++ b/drivers/input/misc/mma745xl.c
@@ -0,0 +1,490 @@
+/*
+ * Driver for Freescale's 3-Axis Acceleration Sensor MMA7455L/MMA7456L
+ *
+ * Copyright (C) 2013 Alexander Shiyan <shc_work@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+
+#define MMA745XL_REG_XOUTL 0x00
+#define MMA745XL_REG_XOUTH 0x01
+#define MMA745XL_REG_YOUTL 0x02
+#define MMA745XL_REG_YOUTH 0x03
+#define MMA745XL_REG_ZOUTL 0x04
+#define MMA745XL_REG_ZOUTH 0x05
+#define MMA745XL_REG_XOUT8 0x06
+#define MMA745XL_REG_YOUT8 0x07
+#define MMA745XL_REG_ZOUT8 0x08
+#define MMA745XL_REG_STATUS 0x09
+# define STATUS_DRDY (1 << 0)
+# define STATUS_DOVR (1 << 1)
+# define STATUS_PERR (1 << 2)
+#define MMA745XL_REG_DETSRC 0x0a
+# define DETSRC_PDZ (1 << 2)
+# define DETSRC_PDY (1 << 3)
+# define DETSRC_PDX (1 << 4)
+# define DETSRC_LDZ (1 << 5)
+# define DETSRC_LDY (1 << 6)
+# define DETSRC_LDX (1 << 7)
+#define MMA745XL_REG_TOUT 0x0b
+#define MMA745XL_REG_I2CAD 0x0d
+#define MMA745XL_REG_USRINF 0x0e
+#define MMA745XL_REG_WHOAMI 0x0f
+# define WHOAMI_MMA745XL 0x55
+#define MMA745XL_REG_XOFFL 0x10
+#define MMA745XL_REG_XOFFH 0x11
+#define MMA745XL_REG_YOFFL 0x12
+#define MMA745XL_REG_YOFFH 0x13
+#define MMA745XL_REG_ZOFFL 0x14
+#define MMA745XL_REG_ZOFFH 0x15
+#define MMA745XL_REG_MCTL 0x16
+# define MCTL_MODE_STANDBY (0 << 0)
+# define MCTL_MODE_MEASUREMENT (1 << 0)
+# define MCTL_MODE_LEVELDET (2 << 0)
+# define MCTL_MODE_PULSEDET (3 << 0)
+# define MCTL_MODE_MASK (3 << 0)
+# define MCTL_GLVL_8 (0 << 2)
+# define MCTL_GLVL_2 (1 << 2)
+# define MCTL_GLVL_4 (2 << 2)
+# define MCTL_GLVL_MASK (3 << 2)
+# define MCTL_STON (1 << 4)
+# define MCTL_SPI3W (1 << 5)
+# define MCTL_DRPD (1 << 6)
+#define MMA745XL_REG_INTRST 0x17
+# define INTRST_CLR_INT1 (1 << 0)
+# define INTRST_CLR_INT2 (1 << 1)
+#define MMA745XL_REG_CTL1 0x18
+# define CTL1_DFBW (1 << 7)
+#define MMA745XL_REG_CTL2 0x19
+#define MMA745XL_REG_LDTH 0x1a
+#define MMA745XL_REG_PDTH 0x1b
+#define MMA745XL_REG_PW 0x1c
+#define MMA745XL_REG_LT 0x1d
+#define MMA745XL_REG_TW 0x1e
+
+#define MMA745XL_MODE_DEF MCTL_MODE_LEVELDET
+#define MMA745XL_MEASURE_TIME 20
+#define MMA745XL_THRESHOLD_DEF 24
+#define MMA745XL_PULSEW_DEF 6
+
+#define MMA745XL_X (1 << 0)
+#define MMA745XL_Y (1 << 1)
+#define MMA745XL_Z (1 << 2)
+
+struct mma745xl {
+ struct regmap *regmap;
+ struct regmap_config regcfg;
+ unsigned int mode;
+};
+
+static int mma745xl_measure_axis(struct mma745xl *priv, unsigned int reg,
+ int *val)
+{
+ unsigned int tmpl = 0, tmph = 0;
+ int ret;
+
+ ret = regmap_read(priv->regmap, reg, &tmpl);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, reg + 1, &tmph);
+ if (!ret) {
+ *val = ((tmph & 0x03) << 8) | (tmpl & 0xff);
+ /* Make signed variable */
+ if (*val & 0x200)
+ *val -= 0x400;
+ }
+
+ return ret;
+}
+
+static void mma745xl_measure(struct input_dev *input, unsigned int mask)
+{
+ struct mma745xl *priv = input_get_drvdata(input);
+ int x, y, z;
+
+ if (mask & MMA745XL_X)
+ if (!mma745xl_measure_axis(priv, MMA745XL_REG_XOUTL, &x))
+ input_report_abs(input, ABS_X, x);
+ if (mask & MMA745XL_Y)
+ if (!mma745xl_measure_axis(priv, MMA745XL_REG_YOUTL, &y))
+ input_report_abs(input, ABS_Y, y);
+ if (mask & MMA745XL_Z)
+ if (!mma745xl_measure_axis(priv, MMA745XL_REG_ZOUTL, &z))
+ input_report_abs(input, ABS_Z, z);
+
+ input_sync(input);
+}
+
+static irqreturn_t mma745xl_interrupt(int irq, void *dev_id)
+{
+ struct input_dev *input = dev_id;
+ struct mma745xl *priv = input_get_drvdata(input);
+ unsigned int val;
+
+ if (!regmap_read(priv->regmap, MMA745XL_REG_DETSRC, &val)) {
+ unsigned int mask;
+
+ mask = (val & (DETSRC_LDX | DETSRC_PDX)) ? MMA745XL_X : 0;
+ mask |= (val & (DETSRC_LDY | DETSRC_PDY)) ? MMA745XL_Y : 0;
+ mask |= (val & (DETSRC_LDZ | DETSRC_PDZ)) ? MMA745XL_Z : 0;
+ mma745xl_measure(input, mask);
+ }
+
+ /* Clear interrupt flags */
+ regmap_write(priv->regmap, MMA745XL_REG_INTRST,
+ INTRST_CLR_INT1 | INTRST_CLR_INT2);
+ /* Enable pins to trigger */
+ regmap_write(priv->regmap, MMA745XL_REG_INTRST, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int mma745xl_open(struct input_dev *input)
+{
+ struct mma745xl *priv = input_get_drvdata(input);
+ unsigned long tmp;
+ unsigned int val;
+ int ret;
+
+ /* Get initial values */
+ ret = regmap_update_bits(priv->regmap, MMA745XL_REG_MCTL,
+ MCTL_MODE_MASK, MCTL_MODE_MEASUREMENT);
+ if (ret)
+ return ret;
+
+ tmp = jiffies + msecs_to_jiffies(MMA745XL_MEASURE_TIME);
+ for (;;) {
+ ret = regmap_read(priv->regmap, MMA745XL_REG_STATUS, &val);
+ if (ret)
+ return ret;
+ if (val == STATUS_DRDY)
+ break;
+ if (val & (STATUS_DOVR | STATUS_PERR)) {
+ /* Clear status */
+ ret = regmap_read(priv->regmap,
+ MMA745XL_REG_XOUTL, &val);
+ if (ret)
+ return ret;
+ /* Restart measuring */
+ tmp = jiffies + msecs_to_jiffies(MMA745XL_MEASURE_TIME);
+ }
+ if (time_after(jiffies, tmp)) {
+ dev_err(&input->dev, "Measure timeout\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ mma745xl_measure(input, MMA745XL_X | MMA745XL_Y | MMA745XL_Z);
+
+ /* Go to desired mode */
+ return regmap_update_bits(priv->regmap, MMA745XL_REG_MCTL,
+ MCTL_MODE_MASK, priv->mode);
+}
+
+static void mma745xl_close(struct input_dev *input)
+{
+ struct mma745xl *priv = input_get_drvdata(input);
+
+ regmap_update_bits(priv->regmap, MMA745XL_REG_MCTL, MCTL_MODE_MASK, 0);
+}
+
+static ssize_t mode_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct input_dev *input = dev_get_drvdata(dev);
+ struct mma745xl *priv = input_get_drvdata(input);
+
+ switch (priv->mode) {
+ case MCTL_MODE_LEVELDET:
+ return sprintf(buf, "level\n");
+ case MCTL_MODE_PULSEDET:
+ return sprintf(buf, "pulse\n");
+ default:
+ break;
+ }
+
+ return sprintf(buf, "unknown\n");
+}
+
+static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct input_dev *input = dev_get_drvdata(dev);
+ struct mma745xl *priv = input_get_drvdata(input);
+
+ if (!strncmp(buf, "level", count))
+ priv->mode = MCTL_MODE_LEVELDET;
+ else if (!strncmp(buf, "pulse", count))
+ priv->mode = MCTL_MODE_PULSEDET;
+ else
+ return -EINVAL;
+
+ return count;
+}
+
+static ssize_t level_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct input_dev *input = dev_get_drvdata(dev);
+ struct mma745xl *priv = input_get_drvdata(input);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MMA745XL_REG_MCTL, &val);
+ if (ret)
+ return ret;
+
+ switch (val & MCTL_GLVL_MASK) {
+ case MCTL_GLVL_2:
+ return sprintf(buf, "2\n");
+ case MCTL_GLVL_4:
+ return sprintf(buf, "4\n");
+ case MCTL_GLVL_8:
+ return sprintf(buf, "8\n");
+ default:
+ break;
+ }
+
+ return sprintf(buf, "unknown\n");
+}
+
+static ssize_t level_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct input_dev *input = dev_get_drvdata(dev);
+ struct mma745xl *priv = input_get_drvdata(input);
+ unsigned long tmp;
+ unsigned int val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &tmp);
+ if (ret)
+ return ret;
+
+ switch (tmp) {
+ case 2:
+ val = MCTL_GLVL_2;
+ break;
+ case 4:
+ val = MCTL_GLVL_4;
+ break;
+ case 8:
+ val = MCTL_GLVL_8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(priv->regmap, MMA745XL_REG_MCTL,
+ MCTL_GLVL_MASK, val);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t threshold_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct input_dev *input = dev_get_drvdata(dev);
+ struct mma745xl *priv = input_get_drvdata(input);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(priv->regmap, MMA745XL_REG_LDTH, &val);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%d\n", val & 0x7f);
+}
+
+static ssize_t threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct input_dev *input = dev_get_drvdata(dev);
+ struct mma745xl *priv = input_get_drvdata(input);
+ unsigned long tmp;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &tmp);
+ if (ret)
+ return ret;
+ if (tmp > 0x7f)
+ return -ERANGE;
+
+ ret = regmap_write(priv->regmap, MMA745XL_REG_LDTH, tmp);
+ if (ret)
+ return ret;
+ ret = regmap_write(priv->regmap, MMA745XL_REG_PDTH, tmp);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(mode);
+static DEVICE_ATTR_RW(level);
+static DEVICE_ATTR_RW(threshold);
+
+static struct attribute *mma745xl_sysfs_attrs[] = {
+ &dev_attr_mode.attr,
+ &dev_attr_level.attr,
+ &dev_attr_threshold.attr,
+ NULL
+};
+
+static const struct attribute_group mma745xl_sysfs_group = {
+ .attrs = mma745xl_sysfs_attrs,
+};
+
+static int mma745xl_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct input_dev *input;
+ unsigned int i, irq, val = 0;
+ struct mma745xl *priv;
+ int ret;
+
+ if (!client->dev.of_node)
+ return -ENOTSUPP;
+
+ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+ input = devm_input_allocate_device(&client->dev);
+ if (!priv || !input)
+ return -ENOMEM;
+
+ priv->regcfg.reg_bits = 8;
+ priv->regcfg.val_bits = 8;
+ priv->regcfg.cache_type = REGCACHE_NONE;
+ priv->regcfg.max_register = MMA745XL_REG_TW;
+ priv->regmap = devm_regmap_init_i2c(client, &priv->regcfg);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ /* Check functionality */
+ ret = regmap_read(priv->regmap, MMA745XL_REG_WHOAMI, &val);
+ if (ret || (val != WHOAMI_MMA745XL)) {
+ dev_err(&client->dev, "Probe failed (ID=0x%02x)\n", val);
+ return ret ? : -ENODEV;
+ }
+
+ input->name = client->name;
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+ input->open = mma745xl_open;
+ input->close = mma745xl_close;
+
+ for (i = ABS_X; i <= ABS_Z; i++) {
+ input_set_capability(input, EV_ABS, i);
+ input_set_abs_params(input, i, -512, 511, 0, 0);
+ }
+
+ input_set_drvdata(input, priv);
+ dev_set_drvdata(&client->dev, input);
+
+ /* Put into standby mode, Data ready status not routed to INT1 */
+ ret = regmap_write(priv->regmap, MMA745XL_REG_MCTL, MCTL_DRPD);
+ if (ret)
+ return ret;
+ /* Set bandwidth to 125 kHz */
+ ret = regmap_write(priv->regmap, MMA745XL_REG_CTL1, CTL1_DFBW);
+ if (ret)
+ return ret;
+ /* Set detecting condition to "OR" */
+ ret = regmap_write(priv->regmap, MMA745XL_REG_CTL2, 0);
+ if (ret)
+ return ret;
+ /* Set level detection threshold limit */
+ ret = regmap_write(priv->regmap, MMA745XL_REG_LDTH,
+ MMA745XL_THRESHOLD_DEF);
+ if (ret)
+ return ret;
+ /* Set pulse detection threshold limit */
+ ret = regmap_write(priv->regmap, MMA745XL_REG_PDTH,
+ MMA745XL_THRESHOLD_DEF);
+ if (ret)
+ return ret;
+ /* Set pulse duration value */
+ ret = regmap_write(priv->regmap, MMA745XL_REG_PW,
+ MMA745XL_PULSEW_DEF);
+ if (ret)
+ return ret;
+
+ priv->mode = MMA745XL_MODE_DEF;
+
+ irq = irq_of_parse_and_map(client->dev.of_node, 0);
+ if (!irq)
+ return -EINVAL;
+ ret = devm_request_threaded_irq(&client->dev, irq, NULL,
+ mma745xl_interrupt, IRQF_ONESHOT,
+ dev_name(&client->dev), input);
+ if (ret)
+ return ret;
+
+ irq = irq_of_parse_and_map(client->dev.of_node, 1);
+ if (!irq)
+ return -EINVAL;
+ ret = devm_request_threaded_irq(&client->dev, irq, NULL,
+ mma745xl_interrupt, IRQF_ONESHOT,
+ dev_name(&client->dev), input);
+ if (ret)
+ return ret;
+
+ ret = input_register_device(input);
+ if (ret)
+ return ret;
+
+ return sysfs_create_group(&client->dev.kobj, &mma745xl_sysfs_group);
+}
+
+static int mma745xl_remove(struct i2c_client *client)
+{
+ sysfs_remove_group(&client->dev.kobj, &mma745xl_sysfs_group);
+
+ return 0;
+}
+
+static const struct of_device_id __maybe_unused mma745xl_dt_ids[] = {
+ { .compatible = "fsl,mma7455l", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mma745xl_dt_ids);
+
+static const struct i2c_device_id mma745xl_ids[] = {
+ { .name = "mma7455l", },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mma745xl_ids);
+
+static struct i2c_driver mma745xl_driver = {
+ .driver = {
+ .name = "mma745xl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(mma745xl_dt_ids),
+ },
+ .id_table = mma745xl_ids,
+ .probe = mma745xl_probe,
+ .remove = mma745xl_remove,
+};
+module_i2c_driver(mma745xl_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@xxxxxxx>");
+MODULE_DESCRIPTION("MMA745xL 3-Axis Acceleration Sensor");
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
