On Mon, Jun 13, 2016 at 05:39:46PM +0800, Chris Zhong wrote: > This patch adds a binding that describes the Rockchip USB Type-C PHY > for rk3399 > > Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx> > > --- > > Changes in v2: > - add some registers description > > Changes in v1: > - add extcon node description > - move the registers in phy driver > - remove the suffix of reset > > .../devicetree/bindings/phy/phy-rockchip-typec.txt | 77 ++++++++++++++++++++++ > 1 file changed, 77 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > > diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > new file mode 100644 > index 0000000..430920c > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt > @@ -0,0 +1,77 @@ > +* ROCKCHIP type-c PHY > +--------------------- > + > +Required properties: > + - compatible : should be "rockchip,rk3399-typec-phy0" or > + "rockchip,rk3399-typec-phy1" Unless these blocks are different, these should be be same compat string. > + - reg: Address and length of the usb phy control register set > + - rockchip,grf : phandle to the syscon managing the "general > + register files" > + - clocks : phandle + clock specifier for the phy clocks > + - clock-names : string, clock name, must be "tcpdcore", "tcpdphy_ref"; > + - resets : a list of phandle + reset specifier pairs > + - reset-names : string reset name, must be: > + "tcphy", "tcphy_pipe", "uphy_tcphy" > + - #phy-cells : Must be 0. See ./phy-bindings.txt for details. > + - extcon : extcon specifier for the Power Delivery > + > +Note, there are 2 type-c phys for RK3399, and they are almost identical, except > +these registers(description below), every register node contains 3 sections: > +offset, enable bit, write mask bit. > + - rockchip,typec_conn_dir : the register of type-c connector direction, Don't use underscores in property names. > + for type-c phy0, it must be <0xe580 0 16>; > + for type-c phy1, it must be <0xe58c 0 16>; > + - rockchip,usb3tousb2_en : the register of type-c force usb3 to usb2 enable > + control. > + for type-c phy0, it must be <0xe580 3 19>; > + for type-c phy1, it must be <0xe58c 3 19>; > + - rockchip,external_psm : the register of type-c phy external psm clock > + selection. > + for type-c phy0, it must be <0xe588 14 30>; > + for type-c phy1, it must be <0xe594 14 30>; > + - rockchip,pipe_status : the register of type-c phy pipe status. > + for type-c phy0, it must be <0xe5c0 0 0>; > + for type-c phy1, it must be <0xe5c0 16 16>; > + - rockchip,uphy_dp_sel : the register of type-c phy selection for DP > + for type-c phy0, it must be <0x6268 19 19>; > + for type-c phy1, it must be <0x6268 3 19>; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
