NXP some platforms aer interrupt was not MSI/MSI-X/INTx but using interrupt line independently. This patch add a "aer" interrupt-names for aer interrupt. Signed-off-by: Po Liu <po.liu@xxxxxxx> --- changes for v3: - None; .../devicetree/bindings/pci/layerscape-pci.txt | 4 ++-- arch/arm/boot/dts/ls1021a.dtsi | 6 ++++-- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 18 +++++++++--------- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 16 ++++++++-------- 4 files changed, 23 insertions(+), 21 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index ef683b2..d27973a 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -19,7 +19,7 @@ Required properties: - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. - interrupt-names: Must include the following entries: - "intr": The interrupt that is asserted for controller interrupts + "aer" : The interrupt that is asserted for aer interrupts - fsl,pcie-scfg: Must include two entries. The first entry must be a link to the SCFG device node The second entry must be '0' or '1' based on physical PCIe controller index. @@ -33,7 +33,7 @@ Example: 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ - interrupt-names = "intr"; + interrupt-names = "aer"; fsl,pcie-scfg = <&scfg 0>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 5ae8e92..b638697 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -633,7 +633,8 @@ reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; fsl,pcie-scfg = <&scfg 0>; #address-cells = <3>; #size-cells = <2>; @@ -656,7 +657,8 @@ reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; fsl,pcie-scfg = <&scfg 1>; #address-cells = <3>; #size-cells = <2>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index de0323b..4beb760 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -473,9 +473,9 @@ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "intr", "pme"; + interrupts = <0 117 0x4>, /* PME interrupt */ + <0 118 0x4>; /* aer interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -497,9 +497,9 @@ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 128 0x4>, - <0 127 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 127 0x4>, + <0 128 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -521,9 +521,9 @@ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 162 0x4>, - <0 161 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 161 0x4>, + <0 162 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 3187c82..6edf24b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -559,8 +559,8 @@ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 108 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 108 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -583,8 +583,8 @@ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 113 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 113 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -607,8 +607,8 @@ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 118 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -631,8 +631,8 @@ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 123 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 123 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; -- 2.1.0.27.g96db324 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
