Hi Adrian, On mar., juin 14 2016, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote: > On 09/06/16 10:10, Gregory CLEMENT wrote: >> From: Victor Gu <xigu@xxxxxxxxxxx> >> >> This path adds the driver for the Marvell Xenon eMMC host controller >> which supports eMMC 5.1, SD 3.0. >> >> However this driver supports only up to eMMC 5.0 since the command queue >> feature is not included (yet) in the driver. >> >> [gregory.clement@xxxxxxxxxxxxxxxxxx: >> - reformulate commit log >> - overload the sdhci_set_uhs_signaling function instead of using a quirk >> - fix a kconfig dependency >> - remove dead code] >> >> Signed-off-by: Victor Gu <xigu@xxxxxxxxxxx> >> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> >> --- >> drivers/mmc/host/Kconfig | 10 + >> drivers/mmc/host/Makefile | 1 + >> drivers/mmc/host/sdhci-xenon.c | 1164 ++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 1175 insertions(+) >> create mode 100644 drivers/mmc/host/sdhci-xenon.c >> > > <SNIP> > >> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c >> new file mode 100644 >> index 000000000000..43c06db95872 >> --- /dev/null >> +++ b/drivers/mmc/host/sdhci-xenon.c > > <SNIP> > >> +static int sdhci_xenon_delay_adj_test(struct sdhci_host *host, >> + struct mmc_card *card, unsigned int delay, >> + bool invert, bool phase) >> +{ >> + int ret; >> + struct mmc_card *oldcard; >> + >> + sdhci_xenon_set_fix_delay(host, delay, invert, phase); >> + >> + /* >> + * If the card is not yet associated to the host, we >> + * temporally do it >> + */ >> + oldcard = card->host->card; >> + if (!oldcard) >> + card->host->card = card; >> + ret = card_alive(card); > > This looks like an abuse of bus_ops->alive(). You will need to get > agreement with Ulf how to handle this. I will wait for Ulf's comments > before reviewing this patch set further. Actually I modified this part of the driver to use bus_ops->alive(). Initially, the alive() code was more or less copied and paste from the mmc core with ugly include from mmc_ops.h and sdio_ops.h to make it work. I find it cleaner to directly access the alive() function. Could you explain why it is an abuse of bus_ops->alive()? Thanks, Gregory >> + card->host->card = oldcard; >> + if (ret) { >> + pr_debug("Xenon failed when sampling fix delay %d, inverted %d, phase %d\n", >> + delay, invert, phase); >> + return -EIO; >> + } >> + >> + pr_debug("Xenon succeeded when sampling fixed delay %d, inverted %d, phase %d\n", >> + delay, invert, phase); >> + return 0; >> +} > > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html