On 06/11/2016 09:10 PM, Bjorn Helgaas wrote: > On Mon, May 09, 2016 at 01:48:27PM +0200, Niklas Cassel wrote: >> From: Niklas Cassel <niklas.cassel@xxxxxxxx> >> >> This commit adds the Device Tree binding documentation that allows to >> describe the PCIe controller found in the Axis ARTPEC-6 SoC. >> >> Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx> > I applied both of these, with Rob's ack on the first, to > pci/host-artpec for v4.8, thanks! > > I made the following minor edits; hopefully I didn't break anything: Hello Bjorn, Your changes look good. Thank you for reviewing and applying :) (By the way, I couldn't find pci/host-artpec on https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/ but I suppose that you just haven't pushed your local branches yet.) > > diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt > index f91b916..330a45b 100644 > --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt > @@ -1,11 +1,11 @@ > * Axis ARTPEC-6 PCIe interface > > -This PCIe host controller is based on the Synopsys Designware PCIe IP > +This PCIe host controller is based on the Synopsys DesignWare PCIe IP > and thus inherits all the common properties defined in designware-pcie.txt. > > Required properties: > - compatible: "axis,artpec6-pcie", "snps,dw-pcie" > -- reg: base addresses and lengths of the pcie controller (DBI), > +- reg: base addresses and lengths of the PCIe controller (DBI), > the phy controller, and configuration address space. > - reg-names: Must include the following entries: > - "dbi" > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > index 1a2de8f..033d9ad 100644 > --- a/drivers/pci/host/Kconfig > +++ b/drivers/pci/host/Kconfig > @@ -250,5 +250,8 @@ config PCIE_ARTPEC6 > depends on MACH_ARTPEC6 > select PCIE_DW > select PCIEPORTBUS > + help > + Say Y here to enable PCIe controller support on Axis ARTPEC-6 > + SoCs. This PCIe controller uses the DesignWare core. > > endmenu > diff --git a/drivers/pci/host/pcie-artpec6.c b/drivers/pci/host/pcie-artpec6.c > index d53dbaf..19adc77 100644 > --- a/drivers/pci/host/pcie-artpec6.c > +++ b/drivers/pci/host/pcie-artpec6.c > @@ -61,7 +61,7 @@ struct artpec6_pcie { > #define PHY_STATUS 0x118 > #define PHY_COSPLLLOCK (1 << 0) > > -#define ARTPEC6_CPU_TO_BUS_ADDR 0x0FFFFFFF > +#define ARTPEC6_CPU_TO_BUS_ADDR 0x0fffffff > > static int artpec6_pcie_establish_link(struct pcie_port *pp) > { > @@ -241,35 +241,26 @@ static int __init artpec6_pcie_probe(struct platform_device *pdev) > > dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); > pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base); > - if (IS_ERR(pp->dbi_base)) { > - ret = PTR_ERR(pp->dbi_base); > - goto fail; > - } > + if (IS_ERR(pp->dbi_base)) > + return PTR_ERR(pp->dbi_base); > > phy_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy"); > artpec6_pcie->phy_base = devm_ioremap_resource(&pdev->dev, phy_base); > - if (IS_ERR(artpec6_pcie->phy_base)) { > - ret = PTR_ERR(artpec6_pcie->phy_base); > - goto fail; > - } > + if (IS_ERR(artpec6_pcie->phy_base)) > + return PTR_ERR(artpec6_pcie->phy_base); > > artpec6_pcie->regmap = > syscon_regmap_lookup_by_phandle(pdev->dev.of_node, > "axis,syscon-pcie"); > - if (IS_ERR(artpec6_pcie->regmap)) { > - ret = PTR_ERR(artpec6_pcie->regmap); > - goto fail; > - } > + if (IS_ERR(artpec6_pcie->regmap)) > + return PTR_ERR(artpec6_pcie->regmap); > > ret = artpec6_add_pcie_port(pp, pdev); > if (ret < 0) > - goto fail; > + return ret; > > platform_set_drvdata(pdev, artpec6_pcie); > return 0; > - > -fail: > - return ret; > } > > static const struct of_device_id artpec6_pcie_of_match[] = { -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
