Hi Heiko,
On 2016/6/8 22:33, Heiko Stübner wrote:
Hi Frank,
Am Dienstag, 7. Juni 2016, 17:15:52 schrieb Frank Wang:
The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.
These series patches add phy-rockchip-inno-usb2.c and the corresponding
documentation.
please see the replies on the v3 thread (regarding handling of multiple phy
blocks) .
OK, I just got back from Dragon Boat Festival (one of the great
traditions of my nation's festival), I will correct it and send out
later today.
BR.
Frank
Changes in v4:
- Used 'phy-supply' instead of 'vbus_*-supply'.
Changes in v3:
- Supplemented some hardware-description into the devicetree bindings.
- Resolved the mapping defect between fixed value in driver and the
property in devicetree.
- Code cleanup.
Changes in v2:
- Specified more hardware-description into the devicetree bindings.
- Optimized some process of driver.
Frank Wang (2):
Documentation: bindings: add DT documentation for Rockchip USB2PHY
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
.../bindings/phy/phy-rockchip-inno-usb2.txt | 62 ++
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-inno-usb2.c | 614
++++++++++++++++++++ 4 files changed, 684 insertions(+)
create mode 100644
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt create
mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
