On 06/10/2016 02:32 PM, Chris Lapa wrote:
> From: Chris Lapa <chris@xxxxxxxxxxx>
>
> Signed-off-by: Chris Lapa <chris@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/power/max8903-charger.txt | 30 ++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/max8903-charger.txt
You again skipped all of the maintainers. Your patch won't be applied.
You need to send the patch to the appropriate person so he/she could
apply it.
>From this patch:
Rob Herring <robh+dt@xxxxxxxxxx> (maintainer:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS,commit_signer:9/19=47%)
Mark Rutland <mark.rutland@xxxxxxx> (maintainer:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS)
>From power suppyy tree:
Sebastian Reichel <sre@xxxxxxxxxx> (maintainer:POWER SUPPLY
CLASS/SUBSYSTEM and DRIVERS)
Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx> (maintainer:POWER SUPPLY
CLASS/SUBSYSTEM and DRIVERS)
David Woodhouse <dwmw2@xxxxxxxxxxxxx> (maintainer:POWER SUPPLY
CLASS/SUBSYSTEM and DRIVERS)
> diff --git a/Documentation/devicetree/bindings/power/max8903-charger.txt b/Documentation/devicetree/bindings/power/max8903-charger.txt
> new file mode 100644
> index 0000000..e0b5366
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/max8903-charger.txt
> @@ -0,0 +1,30 @@
> +Maxim Semiconductor MAX8903 Battery Charger bindings
> +
> +Required properties:
> +- compatible: "maxim,max8903-charger" for MAX8903 Battery Charger
> +- dc_valid: Specifies that the DC portion of the MAX8903 has been connected up
> + and that dok-gpios should be specified
You don't need the dc_valid nor the usb_valid. If the dok-gpios are
present - use DC power. If the uok-gpios - USB power.
If both or none: print error.
BTW, It would be nice if send also the user of this bindings - DTS/DTSI.
Best regards,
Krzysztof
> + - dok-gpios: Valid DC power has been detected
> +- usb_valid: Specifies that the USB portion of the MAX8903 has been connected up
> + and that uok-gpios should be specified
> + - uok-gpios: Valid USB power has been detected
> +
> +Optional properties:
> +- cen-gpios: Charge enable pin
> +- chg-gpios: Charger status pin
> +- flt-gpios: Fault pin
> +- dcm-gpios: Current limit mode setting (DC or USB)
> +- usus-gpios: USB suspend pin
> +
> +
> +Example:
> +
> + max8903-charger {
> + compatible = "maxim,max8903-charger";
> + dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
> + flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
> + chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
> + cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
> + dc_valid;
> + status = "okay";
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
