On Thursday 09 June 2016 11:08 PM, Rhyland Klein wrote:
Add regulators to the Tegra210 Smaug DTS file including
support for the max77620 PMIC.
Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
+
+ fps1 {
+ maxim,shutdown-fps-time-period-us = <5120>;
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ maxim,enable-sleep;
The maxim,enabel-sleep is not the valid property.
It should be
maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+ };
+
+ fps2 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ };
+ };
+
+ regulators {
+ in-ldo0-1-supply = <&pp1350>;
+ in-ldo2-supply = <&pp3300>;
+ in-ldo3-5-supply = <&pp3300>;
+ in-ldo7-8-supply = <&pp1350>;
+
+ ppvar_soc: sd0 {
+ regulator-name = "PPVAR_SOC";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-enable-ramp-delay = <146>;
+ regulator-always-on;
+ regulator-boot-on;
+ maxim,ramp-rate-setting = <27500>;
You need to say regulator-ramp-delay if register config is same as what
platform observed.
This is applicable for all places.
+ regulator-always-on;
+ gpio = <&max77620 3 0>;
GPIO3 is fps-out and hence it can not be done here. Better to do not
provide any gpio entry.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
