[PATCH v4 2/7] leds: documentation: 'ide-disk' to 'disk-activity'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Cc: Joseph Jezak <josejx@xxxxxxxxxx>
Cc: Jörg Sommer <joerg@xxxxxxxxxxxx>
Signed-off-by: Stephan Linz <linz@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/leds/common.txt    | 3 ++-
 Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
 Documentation/laptops/asus-laptop.txt                | 2 +-
 Documentation/leds/leds-class.txt                    | 2 +-
 4 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index af10678..4c08a01 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -26,7 +26,8 @@ Optional properties for child nodes:
      "default-on" - LED will turn on (but for leds-gpio see "default-state"
 		    property in Documentation/devicetree/bindings/gpio/led.txt)
      "heartbeat" - LED "double" flashes at a load average based rate
-     "ide-disk" - LED indicates disk activity
+     "disk-activity" - LED indicates disk activity, the old name "ide-disk" is
+                       still valid for backward compatibility
      "timer" - LED flashes at a fixed, configurable rate
 
 - led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index cbbeb18..5b1b43a 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -33,9 +33,9 @@ Examples:
 leds {
 	compatible = "gpio-leds";
 	hdd {
-		label = "IDE Activity";
+		label = "Disk Activity";
 		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
-		linux,default-trigger = "ide-disk";
+		linux,default-trigger = "disk-activity";
 	};
 
 	fault {
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 79a1bc6..5f28587 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -72,7 +72,7 @@ LEDs
     echo 1 >  /sys/class/leds/asus::mail/brightness
   will switch the mail LED on.
   You can also know if they are on/off by reading their content and use
-  kernel triggers like ide-disk or heartbeat.
+  kernel triggers like disk-activity or heartbeat.
 
 Backlight
 ---------
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index d406d98..44c1bcf 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
 The class also introduces the optional concept of an LED trigger. A trigger
 is a kernel based source of led events. Triggers can either be simple or
 complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
+existing subsystems with minimal additional code. Examples are the disk-activity,
 nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
 optimises away.
 
-- 
2.8.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux