Hi, On 08.06.2016 16:17, Lee Jones wrote: > On Thu, 02 Jun 2016, Wadim Egorov wrote: > >> The RK818 chip is a power management IC for multimedia and handheld > "Power Management IC (PMIC)" > >> devices. It contains the following components: >> >> - Regulators >> - RTC >> - Clkout > Clocking > >> - battery support > Battery support > >> Both chips RK808 and RK818 are using a similar register map. > "Both RK808 ad RK818 chips" > >> So we can reuse the RTC and Clkout functionality. > Swap '.' for ','. > >> Signed-off-by: Wadim Egorov <w.egorov@xxxxxxxxx> >> --- >> drivers/mfd/Kconfig | 4 +- >> drivers/mfd/rk808.c | 231 ++++++++++++++++++++++++++++++++++++++-------- >> include/linux/mfd/rk808.h | 162 ++++++++++++++++++++++++++++++-- >> 3 files changed, 350 insertions(+), 47 deletions(-) >> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig >> index 1bcf601..7ba464b 100644 >> --- a/drivers/mfd/Kconfig >> +++ b/drivers/mfd/Kconfig >> @@ -839,13 +839,13 @@ config MFD_RC5T583 >> different functionality of the device. >> >> config MFD_RK808 >> - tristate "Rockchip RK808 Power Management chip" >> + tristate "Rockchip RK808/RK818 Power Management chip" > "Chip" > >> depends on I2C && OF >> select MFD_CORE >> select REGMAP_I2C >> select REGMAP_IRQ >> help >> - If you say yes here you get support for the RK808 >> + If you say yes here you get support for the RK808 and RK818 >> Power Management chips. >> This driver provides common support for accessing the device >> through I2C interface. The device supports multiple sub-devices >> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c >> index 49d7f62..3cf9724 100644 >> --- a/drivers/mfd/rk808.c >> +++ b/drivers/mfd/rk808.c >> @@ -1,11 +1,15 @@ >> /* >> - * MFD core driver for Rockchip RK808 >> + * MFD core driver for Rockchip RK808/RK818 >> * >> * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd >> * >> * Author: Chris Zhong <zyw@xxxxxxxxxxxxxx> >> * Author: Zhang Qing <zhangqing@xxxxxxxxxxxxxx> >> * >> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH >> + * >> + * Author: Wadim Egorov <w.egorov@xxxxxxxxx> >> + * >> * This program is free software; you can redistribute it and/or modify it >> * under the terms and conditions of the GNU General Public License, >> * version 2, as published by the Free Software Foundation. >> @@ -22,12 +26,7 @@ >> #include <linux/mfd/core.h> >> #include <linux/module.h> >> #include <linux/regmap.h> >> - >> -struct rk808_reg_data { >> - int addr; >> - int mask; >> - int value; >> -}; > Why are you moving this to the header? It is now part of the rk808 struct. > >> +#include <linux/of_device.h> >> >> static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg) >> { >> @@ -57,6 +56,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg) >> return false; >> } >> >> +static const struct regmap_config rk818_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + .max_register = RK818_USB_CTRL_REG, >> + .cache_type = REGCACHE_RBTREE, >> + .volatile_reg = rk808_is_volatile_reg, >> +}; >> + >> static const struct regmap_config rk808_regmap_config = { >> .reg_bits = 8, >> .val_bits = 8, >> @@ -83,7 +90,17 @@ static const struct mfd_cell rk808s[] = { >> }, >> }; >> >> -static const struct rk808_reg_data pre_init_reg[] = { >> +static const struct mfd_cell rk818s[] = { >> + { .name = "rk808-clkout", }, > How does this differ to a normal -clock driver? I don't know. It is a normal clock driver. > >> + { .name = "rk808-regulator", }, >> + { >> + .name = "rk808-rtc", >> + .num_resources = ARRAY_SIZE(rtc_resources), >> + .resources = &rtc_resources[0], > .resources = rtc_resources, ? > >> + }, >> +}; >> + >> +static const struct rk8xx_reg_data rk808_pre_init_reg[] = { >> { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA }, >> { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA }, >> { RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA }, >> @@ -94,6 +111,22 @@ static const struct rk808_reg_data pre_init_reg[] = { >> VB_LO_SEL_3500MV }, >> }; >> >> +static const struct rk8xx_reg_data rk818_pre_init_reg[] = { >> + { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK, >> + RK818_USB_ILMIN_2000MA }, >> + /* close charger when usb lower then 3.4V */ >> + { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK, (0x7 << 4) }, >> + /* no action when vref */ >> + { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL }, >> + /* enable HDMI 5V */ >> + { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN }, >> + /* improve efficiency */ >> + { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA }, >> + { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA }, >> + { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA }, >> + { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | VB_LO_SEL_3500MV }, >> +}; > The alignment here looks odd. I will fix it in the next version. > >> static const struct regmap_irq rk808_irqs[] = { >> /* INT_STS */ >> [RK808_IRQ_VOUT_LO] = { >> @@ -136,6 +169,76 @@ static const struct regmap_irq rk808_irqs[] = { >> }, >> }; >> >> +static const struct regmap_irq rk818_irqs[] = { >> + /* INT_STS */ >> + [RK818_IRQ_VOUT_LO] = { >> + .mask = RK818_IRQ_VOUT_LO_MSK, >> + .reg_offset = 0, >> + }, >> + [RK818_IRQ_VB_LO] = { >> + .mask = RK818_IRQ_VB_LO_MSK, >> + .reg_offset = 0, >> + }, >> + [RK818_IRQ_PWRON] = { >> + .mask = RK818_IRQ_PWRON_MSK, >> + .reg_offset = 0, >> + }, >> + [RK818_IRQ_PWRON_LP] = { >> + .mask = RK818_IRQ_PWRON_LP_MSK, >> + .reg_offset = 0, >> + }, >> + [RK818_IRQ_HOTDIE] = { >> + .mask = RK818_IRQ_HOTDIE_MSK, >> + .reg_offset = 0, >> + }, >> + [RK818_IRQ_RTC_ALARM] = { >> + .mask = RK818_IRQ_RTC_ALARM_MSK, >> + .reg_offset = 0, >> + }, >> + [RK818_IRQ_RTC_PERIOD] = { >> + .mask = RK818_IRQ_RTC_PERIOD_MSK, >> + .reg_offset = 0, >> + }, >> + [RK818_IRQ_USB_OV] = { >> + .mask = RK818_IRQ_USB_OV_MSK, >> + .reg_offset = 0, >> + }, >> + >> + /* INT_STS2 */ >> + [RK818_IRQ_PLUG_IN] = { >> + .mask = RK818_IRQ_PLUG_IN_MSK, >> + .reg_offset = 1, >> + }, >> + [RK818_IRQ_PLUG_OUT] = { >> + .mask = RK818_IRQ_PLUG_OUT_MSK, >> + .reg_offset = 1, >> + }, >> + [RK818_IRQ_CHG_OK] = { >> + .mask = RK818_IRQ_CHG_OK_MSK, >> + .reg_offset = 1, >> + }, >> + [RK818_IRQ_CHG_TE] = { >> + .mask = RK818_IRQ_CHG_TE_MSK, >> + .reg_offset = 1, >> + }, >> + [RK818_IRQ_CHG_TS1] = { >> + .mask = RK818_IRQ_CHG_TS1_MSK, >> + .reg_offset = 1, >> + }, >> + [RK818_IRQ_TS2] = { >> + .mask = RK818_IRQ_TS2_MSK, >> + .reg_offset = 1, >> + }, >> + [RK818_IRQ_CHG_CVTLIM] = { >> + .mask = RK818_IRQ_CHG_CVTLIM_MSK, >> + .reg_offset = 1, >> + }, >> + [RK818_IRQ_DISCHG_ILIM] = { >> + .mask = RK818_IRQ_DISCHG_ILIM_MSK, >> + .reg_offset = 1, >> + }, >> +}; >> + >> static struct regmap_irq_chip rk808_irq_chip = { >> .name = "rk808", >> .irqs = rk808_irqs, >> @@ -148,6 +251,18 @@ static struct regmap_irq_chip rk808_irq_chip = { >> .init_ack_masked = true, >> }; >> >> +static struct regmap_irq_chip rk818_irq_chip = { >> + .name = "rk818", >> + .irqs = rk818_irqs, >> + .num_irqs = ARRAY_SIZE(rk818_irqs), >> + .num_regs = 2, >> + .irq_reg_stride = 2, >> + .status_base = RK818_INT_STS_REG1, >> + .mask_base = RK818_INT_STS_MSK_REG1, >> + .ack_base = RK818_INT_STS_REG1, >> + .init_ack_masked = true, >> +}; >> + >> static struct i2c_client *rk808_i2c_client; >> static void rk808_device_shutdown(void) >> { >> @@ -167,6 +282,48 @@ static void rk808_device_shutdown(void) >> dev_err(&rk808_i2c_client->dev, "power off error!\n"); >> } >> >> +static const struct of_device_id rk808_of_match[] = { >> + { .compatible = "rockchip,rk808", .data = (void *) RK808_ID }, >> + { .compatible = "rockchip,rk818", .data = (void *) RK818_ID }, >> + { }, >> +}; >> +MODULE_DEVICE_TABLE(of, rk808_of_match); >> + >> +static int rk8xx_match_device(struct rk808 *rk808, struct device *dev) > If you're going to do it this way, please switch these parameters. > > It's more common to return the pointer however. If it's more common I will return a pointer to rk808. > >> +{ >> + const struct of_device_id *of_id; >> + >> + of_id = of_match_device(rk808_of_match, dev); >> + if (!of_id) { >> + dev_err(dev, "Unable to match OF ID\n"); >> + return -ENODEV; >> + } >> + rk808->variant = (long) of_id->data; >> + >> + switch (rk808->variant) { >> + case RK808_ID: >> + rk808->nr_cells = ARRAY_SIZE(rk808s); >> + rk808->cells = rk808s; >> + rk808->regmap_cfg = &rk808_regmap_config; >> + rk808->regmap_irq_chip = &rk808_irq_chip; >> + rk808->pre_init_reg = rk808_pre_init_reg; >> + rk808->nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg); >> + break; >> + case RK818_ID: >> + rk808->nr_cells = ARRAY_SIZE(rk818s); >> + rk808->cells = rk818s; >> + rk808->regmap_cfg = &rk818_regmap_config; >> + rk808->regmap_irq_chip = &rk818_irq_chip; >> + rk808->pre_init_reg = rk818_pre_init_reg; >> + rk808->nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg); >> + break; >> + default: >> + dev_err(dev, "unsupported RK8XX ID %lu\n", rk808->variant); >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> static int rk808_probe(struct i2c_client *client, >> const struct i2c_device_id *id) >> { >> @@ -176,46 +333,52 @@ static int rk808_probe(struct i2c_client *client, >> int ret; >> int i; >> >> - if (!client->irq) { >> - dev_err(&client->dev, "No interrupt support, no core IRQ\n"); >> - return -EINVAL; >> - } >> - >> rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL); >> if (!rk808) >> return -ENOMEM; >> >> - rk808->regmap = devm_regmap_init_i2c(client, &rk808_regmap_config); >> + ret = rk8xx_match_device(rk808, &client->dev); > Is there a way to dynamically probe the device? No device ID you can > read directly from the silicon? AFAIK there is no device ID register. At least it is not documented in the manual. Wadim > >> + if (ret) >> + return ret; >> + >> + rk808->i2c = client; >> + i2c_set_clientdata(client, rk808); >> + >> + rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg); >> if (IS_ERR(rk808->regmap)) { >> dev_err(&client->dev, "regmap initialization failed\n"); >> return PTR_ERR(rk808->regmap); >> } >> >> - for (i = 0; i < ARRAY_SIZE(pre_init_reg); i++) { >> - ret = regmap_update_bits(rk808->regmap, pre_init_reg[i].addr, >> - pre_init_reg[i].mask, >> - pre_init_reg[i].value); >> - if (ret) { >> - dev_err(&client->dev, >> - "0x%x write err\n", pre_init_reg[i].addr); >> - return ret; >> - } >> + if (!client->irq) { >> + dev_err(&client->dev, "No interrupt support, no core IRQ\n"); >> + return -EINVAL; >> } >> >> ret = regmap_add_irq_chip(rk808->regmap, client->irq, >> IRQF_ONESHOT, -1, >> - &rk808_irq_chip, &rk808->irq_data); >> + rk808->regmap_irq_chip, &rk808->irq_data); >> if (ret) { >> dev_err(&client->dev, "Failed to add irq_chip %d\n", ret); >> return ret; >> } >> >> - rk808->i2c = client; >> - i2c_set_clientdata(client, rk808); >> + for (i = 0; i < rk808->nr_pre_init_regs; i++) { >> + ret = regmap_update_bits(rk808->regmap, >> + rk808->pre_init_reg[i].addr, >> + rk808->pre_init_reg[i].mask, >> + rk808->pre_init_reg[i].value); >> + if (ret) { >> + dev_err(&client->dev, >> + "0x%x write err\n", >> + rk808->pre_init_reg[i].addr); >> + return ret; >> + } >> + } >> >> - ret = devm_mfd_add_devices(&client->dev, -1, >> - rk808s, ARRAY_SIZE(rk808s), NULL, 0, >> - regmap_irq_get_domain(rk808->irq_data)); >> + ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, >> + rk808->cells, rk808->nr_cells, NULL, 0, >> + regmap_irq_get_domain(rk808->irq_data)); >> if (ret) { >> dev_err(&client->dev, "failed to add MFD devices %d\n", ret); >> goto err_irq; >> @@ -245,14 +408,9 @@ static int rk808_remove(struct i2c_client *client) >> return 0; >> } >> >> -static const struct of_device_id rk808_of_match[] = { >> - { .compatible = "rockchip,rk808" }, >> - { }, >> -}; >> -MODULE_DEVICE_TABLE(of, rk808_of_match); >> - >> static const struct i2c_device_id rk808_ids[] = { >> { "rk808" }, >> + { "rk818" }, >> { }, >> }; >> MODULE_DEVICE_TABLE(i2c, rk808_ids); >> @@ -272,4 +430,5 @@ module_i2c_driver(rk808_i2c_driver); >> MODULE_LICENSE("GPL"); >> MODULE_AUTHOR("Chris Zhong <zyw@xxxxxxxxxxxxxx>"); >> MODULE_AUTHOR("Zhang Qing <zhangqing@xxxxxxxxxxxxxx>"); >> -MODULE_DESCRIPTION("RK808 PMIC driver"); >> +MODULE_AUTHOR("Wadim Egorov <w.egorov@xxxxxxxxx>"); >> +MODULE_DESCRIPTION("RK808/RK818 PMIC driver"); >> diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h >> index 441b6ee..5ce810c 100644 >> --- a/include/linux/mfd/rk808.h >> +++ b/include/linux/mfd/rk808.h >> @@ -1,11 +1,15 @@ >> /* >> - * rk808.h for Rockchip RK808 >> + * Register definitions for Rockchip's RK808/RK818 PMIC >> * >> * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd >> * >> * Author: Chris Zhong <zyw@xxxxxxxxxxxxxx> >> * Author: Zhang Qing <zhangqing@xxxxxxxxxxxxxx> >> * >> + * Copyright (C) 2016 PHYTEC Messtechnik GmbH >> + * >> + * Author: Wadim Egorov <w.egorov@xxxxxxxxx> >> + * >> * This program is free software; you can redistribute it and/or modify it >> * under the terms and conditions of the GNU General Public License, >> * version 2, as published by the Free Software Foundation. >> @@ -16,8 +20,8 @@ >> * more details. >> */ >> >> -#ifndef __LINUX_REGULATOR_rk808_H >> -#define __LINUX_REGULATOR_rk808_H >> +#ifndef __LINUX_REGULATOR_RK808_H >> +#define __LINUX_REGULATOR_RK808_H >> >> #include <linux/regulator/machine.h> >> #include <linux/regmap.h> >> @@ -28,7 +32,7 @@ >> >> #define RK808_DCDC1 0 /* (0+RK808_START) */ >> #define RK808_LDO1 4 /* (4+RK808_START) */ >> -#define RK808_NUM_REGULATORS 14 >> +#define RK808_NUM_REGULATORS 14 >> >> enum rk808_reg { >> RK808_ID_DCDC1, >> @@ -115,7 +119,92 @@ enum rk808_reg { >> #define RK808_INT_STS_MSK_REG2 0x4f >> #define RK808_IO_POL_REG 0x50 >> >> -/* IRQ Definitions */ >> +/* RK818 */ >> +#define RK818_DCDC1 0 >> +#define RK818_LDO1 4 >> +#define RK818_NUM_REGULATORS 17 >> + >> +enum rk818_reg { >> + RK818_ID_DCDC1, >> + RK818_ID_DCDC2, >> + RK818_ID_DCDC3, >> + RK818_ID_DCDC4, >> + RK818_ID_BOOST, >> + RK818_ID_LDO1, >> + RK818_ID_LDO2, >> + RK818_ID_LDO3, >> + RK818_ID_LDO4, >> + RK818_ID_LDO5, >> + RK818_ID_LDO6, >> + RK818_ID_LDO7, >> + RK818_ID_LDO8, >> + RK818_ID_LDO9, >> + RK818_ID_SWITCH, >> + RK818_ID_HDMI_SWITCH, >> + RK818_ID_OTG_SWITCH, >> +}; >> + >> +#define RK818_DCDC_EN_REG 0x23 >> +#define RK818_LDO_EN_REG 0x24 >> +#define RK818_SLEEP_SET_OFF_REG1 0x25 >> +#define RK818_SLEEP_SET_OFF_REG2 0x26 >> +#define RK818_DCDC_UV_STS_REG 0x27 >> +#define RK818_DCDC_UV_ACT_REG 0x28 >> +#define RK818_LDO_UV_STS_REG 0x29 >> +#define RK818_LDO_UV_ACT_REG 0x2a >> +#define RK818_DCDC_PG_REG 0x2b >> +#define RK818_LDO_PG_REG 0x2c >> +#define RK818_VOUT_MON_TDB_REG 0x2d >> +#define RK818_BUCK1_CONFIG_REG 0x2e >> +#define RK818_BUCK1_ON_VSEL_REG 0x2f >> +#define RK818_BUCK1_SLP_VSEL_REG 0x30 >> +#define RK818_BUCK2_CONFIG_REG 0x32 >> +#define RK818_BUCK2_ON_VSEL_REG 0x33 >> +#define RK818_BUCK2_SLP_VSEL_REG 0x34 >> +#define RK818_BUCK3_CONFIG_REG 0x36 >> +#define RK818_BUCK4_CONFIG_REG 0x37 >> +#define RK818_BUCK4_ON_VSEL_REG 0x38 >> +#define RK818_BUCK4_SLP_VSEL_REG 0x39 >> +#define RK818_BOOST_CONFIG_REG 0x3a >> +#define RK818_LDO1_ON_VSEL_REG 0x3b >> +#define RK818_LDO1_SLP_VSEL_REG 0x3c >> +#define RK818_LDO2_ON_VSEL_REG 0x3d >> +#define RK818_LDO2_SLP_VSEL_REG 0x3e >> +#define RK818_LDO3_ON_VSEL_REG 0x3f >> +#define RK818_LDO3_SLP_VSEL_REG 0x40 >> +#define RK818_LDO4_ON_VSEL_REG 0x41 >> +#define RK818_LDO4_SLP_VSEL_REG 0x42 >> +#define RK818_LDO5_ON_VSEL_REG 0x43 >> +#define RK818_LDO5_SLP_VSEL_REG 0x44 >> +#define RK818_LDO6_ON_VSEL_REG 0x45 >> +#define RK818_LDO6_SLP_VSEL_REG 0x46 >> +#define RK818_LDO7_ON_VSEL_REG 0x47 >> +#define RK818_LDO7_SLP_VSEL_REG 0x48 >> +#define RK818_LDO8_ON_VSEL_REG 0x49 >> +#define RK818_LDO8_SLP_VSEL_REG 0x4a >> +#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54 >> +#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55 >> +#define RK818_DEVCTRL_REG 0x4b >> +#define RK818_INT_STS_REG1 0X4c >> +#define RK818_INT_STS_MSK_REG1 0x4d >> +#define RK818_INT_STS_REG2 0x4e >> +#define RK818_INT_STS_MSK_REG2 0x4f >> +#define RK818_IO_POL_REG 0x50 >> +#define RK818_H5V_EN_REG 0x52 >> +#define RK818_SLEEP_SET_OFF_REG3 0x53 >> +#define RK818_BOOST_LDO9_ON_VSEL_REG 0x54 >> +#define RK818_BOOST_LDO9_SLP_VSEL_REG 0x55 >> +#define RK818_BOOST_CTRL_REG 0x56 >> +#define RK818_DCDC_ILMAX 0x90 >> +#define RK818_USB_CTRL_REG 0xa1 >> + >> +#define RK818_H5V_EN BIT(0) >> +#define RK818_REF_RDY_CTRL BIT(1) >> +#define RK818_USB_ILIM_SEL_MASK 0xf >> +#define RK818_USB_ILMIN_2000MA 0x7 >> +#define RK818_USB_CHG_SD_VSEL_MASK 0x70 >> + >> +/* RK808 IRQ Definitions */ >> #define RK808_IRQ_VOUT_LO 0 >> #define RK808_IRQ_VB_LO 1 >> #define RK808_IRQ_PWRON 2 >> @@ -137,6 +226,43 @@ enum rk808_reg { >> #define RK808_IRQ_PLUG_IN_INT_MSK BIT(0) >> #define RK808_IRQ_PLUG_OUT_INT_MSK BIT(1) >> >> +/* RK818 IRQ Definitions */ >> +#define RK818_IRQ_VOUT_LO 0 >> +#define RK818_IRQ_VB_LO 1 >> +#define RK818_IRQ_PWRON 2 >> +#define RK818_IRQ_PWRON_LP 3 >> +#define RK818_IRQ_HOTDIE 4 >> +#define RK818_IRQ_RTC_ALARM 5 >> +#define RK818_IRQ_RTC_PERIOD 6 >> +#define RK818_IRQ_USB_OV 7 >> +#define RK818_IRQ_PLUG_IN 8 >> +#define RK818_IRQ_PLUG_OUT 9 >> +#define RK818_IRQ_CHG_OK 10 >> +#define RK818_IRQ_CHG_TE 11 >> +#define RK818_IRQ_CHG_TS1 12 >> +#define RK818_IRQ_TS2 13 >> +#define RK818_IRQ_CHG_CVTLIM 14 >> +#define RK818_IRQ_DISCHG_ILIM 7 >> + >> +#define RK818_IRQ_VOUT_LO_MSK BIT(0) >> +#define RK818_IRQ_VB_LO_MSK BIT(1) >> +#define RK818_IRQ_PWRON_MSK BIT(2) >> +#define RK818_IRQ_PWRON_LP_MSK BIT(3) >> +#define RK818_IRQ_HOTDIE_MSK BIT(4) >> +#define RK818_IRQ_RTC_ALARM_MSK BIT(5) >> +#define RK818_IRQ_RTC_PERIOD_MSK BIT(6) >> +#define RK818_IRQ_USB_OV_MSK BIT(7) >> +#define RK818_IRQ_PLUG_IN_MSK BIT(0) >> +#define RK818_IRQ_PLUG_OUT_MSK BIT(1) >> +#define RK818_IRQ_CHG_OK_MSK BIT(2) >> +#define RK818_IRQ_CHG_TE_MSK BIT(3) >> +#define RK818_IRQ_CHG_TS1_MSK BIT(4) >> +#define RK818_IRQ_TS2_MSK BIT(5) >> +#define RK818_IRQ_CHG_CVTLIM_MSK BIT(6) >> +#define RK818_IRQ_DISCHG_ILIM_MSK BIT(7) >> + >> +#define RK818_NUM_IRQ 16 >> + >> #define RK808_VBAT_LOW_2V8 0x00 >> #define RK808_VBAT_LOW_2V9 0x01 >> #define RK808_VBAT_LOW_3V0 0x02 >> @@ -191,9 +317,27 @@ enum { >> BOOST_ILMIN_250MA, >> }; >> >> +enum { >> + RK808_ID, >> + RK818_ID, >> +}; >> + >> +struct rk8xx_reg_data { >> + int addr; >> + int mask; >> + int value; >> +}; >> + >> struct rk808 { >> - struct i2c_client *i2c; >> - struct regmap_irq_chip_data *irq_data; >> - struct regmap *regmap; >> + struct i2c_client *i2c; >> + struct regmap_irq_chip_data *irq_data; >> + struct regmap *regmap; >> + long variant; >> + int nr_cells; >> + const struct mfd_cell *cells; >> + const struct regmap_config *regmap_cfg; >> + const struct regmap_irq_chip *regmap_irq_chip; >> + const struct rk8xx_reg_data *pre_init_reg; >> + int nr_pre_init_regs; >> }; >> -#endif /* __LINUX_REGULATOR_rk808_H */ >> +#endif /* __LINUX_REGULATOR_RK808_H */ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html