On Tue, 7 Jun 2016 22:41:47 +0200
Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Add support for the various dividers (linear, table or pow-of-two based)
> found in the CCU.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu_div.c | 136 +++++++++++++++++++++++++++++++++++++++++
> drivers/clk/sunxi-ng/ccu_div.h | 135 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 272 insertions(+)
> create mode 100644 drivers/clk/sunxi-ng/ccu_div.c
> create mode 100644 drivers/clk/sunxi-ng/ccu_div.h
>
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index c47cbd309d59..67a2559fe283 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -3,6 +3,7 @@ obj-y += ccu_reset.o
>
> obj-y += ccu_frac.o
>
> +obj-y += ccu_div.o
> obj-y += ccu_fixed_factor.o
> obj-y += ccu_gate.o
> obj-y += ccu_mux.o
> diff --git a/drivers/clk/sunxi-ng/ccu_div.c b/drivers/clk/sunxi-ng/ccu_div.c
> new file mode 100644
> index 000000000000..8659b4cb6c20
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu_div.c
[snip]
> diff --git a/drivers/clk/sunxi-ng/ccu_div.h b/drivers/clk/sunxi-ng/ccu_div.h
> new file mode 100644
> index 000000000000..5edbdc1a98c8
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu_div.h
> @@ -0,0 +1,135 @@
> +/*
> + * Copyright (c) 2016 Maxime Ripard. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _CCU_DIV_H_
> +#define _CCU_DIV_H_
> +
> +#include <linux/clk-provider.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_mux.h"
> +
> +struct _ccu_div {
> + u8 shift;
> + u8 width;
> +
> + u32 flags;
> +
> + struct clk_div_table *table;
> +};
> +
> +#define _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, _table, _flags) \
> + { \
> + .shift = _shift, \
> + .width = _width, \
> + .flags = _flags, \
> + .table = _table, \
> + }
> +
> +#define _SUNXI_CCU_DIV_FLAGS(_shift, _width, _flags) \
> + _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, NULL, _flags)
> +
> +#define _SUNXI_CCU_DIV_TABLE(_shift, _width, _table) \
> + _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, _table, 0)
> +
> +#define _SUNXI_CCU_DIV(_shift, _width) \
> + _SUNXI_CCU_DIV_TABLE_FLAGS(_shift, _width, NULL, 0)
> +
> +struct ccu_div {
> + u32 enable;
> +
> + struct _ccu_div div;
> + struct ccu_mux_internal mux;
> + struct ccu_common common;
> +};
> +
> +#define SUNXI_CCU_DIV_TABLE_WITH_GATE(_struct, _name, _parent, _reg, \
> + _shift, _width, \
> + _table, _gate, _flags) \
> + struct ccu_div _struct = { \
The gate is missing
.enable = _gate,
(I was really afraid when I saw 217°C as the board temperature!)
> + .div = _SUNXI_CCU_DIV_TABLE(_shift, _width, \
> + _table), \
> + .common = { \
> + .reg = _reg, \
> + .features = CCU_FEATURE_GATE, \
> + .hw.init = SUNXI_HW_INIT(_name, \
> + _parent, \
> + &ccu_div_ops, \
> + _flags), \
> + } \
> + }
> +
> +
> +#define SUNXI_CCU_DIV_TABLE(_struct, _name, _parent, _reg, \
> + _shift, _width, \
> + _table, _flags) \
[snip]
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
