On Tue, Jun 07, 2016 at 02:39:25PM +0100, Sudeep Holla wrote: > > > On 07/06/16 14:22, Mark Rutland wrote: > >On Mon, Jun 06, 2016 at 04:53:58PM +0100, Sudeep Holla wrote: > >>The System Control Processor (SCP) provides peripheral devices with > >>power domains that can be enabled and disabled viathe System Control > >>and Power Interface (SCPI) Message Protocol. Add bindings to allow > >>probing of these device power domians. > >> > >>Cc: Rob Herring <robh+dt@xxxxxxxxxx> > >>Cc: Mark Rutland <mark.rutland@xxxxxxx> > >>Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > >>Cc: devicetree@xxxxxxxxxxxxxxx > >>Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx> > >>--- > >> Documentation/devicetree/bindings/arm/arm,scpi.txt | 34 ++++++++++++++++++++++ > >> 1 file changed, 34 insertions(+) > >> > >>diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt > >>index 313dabdc14f9..7141670d649b 100644 > >>--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt > >>+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt > >>@@ -87,10 +87,33 @@ SCPI provides an API to access the various sensors on the SoC. > >> implementation for the IDs to use. For Juno > >> R0 and Juno R1 refer to [3]. > >> > >>+Power domain bindings for the power domains based on SCPI Message Protocol > >>+------------------------------------------------------------ > >>+ > >>+This binding uses the generic power domain binding[4]. > >>+ > >>+PM domain providers > >>+=================== > >>+ > >>+Required properties: > >>+ - #power-domain-cells : Should be 1. Contains the device or the power > >>+ domain ID value used by SCPI commands. > >>+ - num-domains: Total number of power domains provided by SCPI. This is > >>+ needed as the SCPI message protocol lacks a mechanism to > >>+ query this information runtime. > > ^ > >I guess there should be an 'at' here. > > > > Will fix. > > >Are domain IDs zero-based and definitely non-sparse? > > > > Yes Ok. So FWIW, with the fix above: Acked-by: Mark Rutland <mark.rutland@xxxxxxx> Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
