Start to use gpiod API for reset gpio. Signed-off-by: Jyri Sarha <jsarha@xxxxxx> --- drivers/video/fbdev/ssd1307fb.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-) diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c index a9c45c8..b27912c 100644 --- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -73,7 +73,7 @@ struct ssd1307fb_par { u32 prechargep2; struct pwm_device *pwm; u32 pwm_period; - int reset; + struct gpio_desc *reset; u32 seg_remap; u32 vcomh; u32 width; @@ -562,10 +562,11 @@ static int ssd1307fb_probe(struct i2c_client *client, par->device_info = (struct ssd1307fb_deviceinfo *)of_match_device( ssd1307fb_of_match, &client->dev)->data; - par->reset = of_get_named_gpio(client->dev.of_node, - "reset-gpios", 0); - if (!gpio_is_valid(par->reset)) { - ret = -EINVAL; + par->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(par->reset)) { + dev_err(&client->dev, "failed to get reset gpio: %ld\n", + PTR_ERR(par->reset)); + ret = PTR_ERR(par->reset); goto fb_alloc_error; } @@ -643,22 +644,12 @@ static int ssd1307fb_probe(struct i2c_client *client, fb_deferred_io_init(info); - ret = devm_gpio_request_one(&client->dev, par->reset, - GPIOF_OUT_INIT_HIGH, - "oled-reset"); - if (ret) { - dev_err(&client->dev, - "failed to request gpio %d: %d\n", - par->reset, ret); - goto reset_oled_error; - } - i2c_set_clientdata(client, info); /* Reset the screen */ - gpio_set_value(par->reset, 0); + gpiod_set_value(par->reset, 0); udelay(4); - gpio_set_value(par->reset, 1); + gpiod_set_value(par->reset, 1); udelay(4); ret = ssd1307fb_init(par); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html